Jump to content


RSS Feed
Joe's config table parameters

LSJ conversion project

Pics of my LSJ engine conversion project. This is the US spec 2.0LSJ supercharged engine with the US ecu, adapted for the VX220/Speedster.



Other Albums by Exmantaa


Sort by:
Sort direction:
The engine
  • 1512
  • 0

The engine

Bog standard LSJ engine; 2.0l, supercharged with a GM Stage 2 pulle...

Engine 2
  • 1817
  • 0

Engine 2

Bog standard LSJ engine; 2.0l, supercharged with a GM Stage 2 pulle...

modified oil cooler adapter
  • 2099
  • 0

modified oil cooler adapter

wanted to keep the std VX oil and waterhose layout, so the oil cool...

The project car.
  • 1308
  • 0

The project car.

Nothing wrong with yellow... This is an imported VX220 with some mi...

The project car 2
  • 1190
  • 0

The project car 2

Nothing wrong with yellow... This is an imported VX220 with some mi...

Dismantling...
  • 881
  • 0

Dismantling...

After the usual rusted bolts were grinded off, result.

Dismantling 2
  • 1049
  • 0

Dismantling 2

After the usual rusted bolts were grinded off, result.

Short VX
  • 1278
  • 0

Short VX

After the usual rusted bolts were grinded off, result.

Removed old stuff
  • 1194
  • 0

Removed old stuff

Time to get serious; so old stuff has to move.

Engine out
  • 1016
  • 0

Engine out

One dirty old engine, but still good for some parts. (The thermosta...

Empty space
  • 997
  • 0

Empty space

An empty, but very dirty and oily engine compartment...

Oily space
  • 993
  • 0

Oily space

That side was not much better...

Looking much better
  • 991
  • 0

Looking much better

Spend an afternoon cleaning with degreaser. Much better to work on...

Cleaned
  • 1078
  • 0

Cleaned

Cleaned the gearbox inside and out, All hoses look a lot better too...

Engine & project
  • 1036
  • 0

Engine & project

THAT ENGINE has to go IN THERE... http://www.vx220.org.uk/forums/pu...

More space
  • 1039
  • 0

More space

Needed more space to move the car around, so this one had to move up.

Cleaned panel & new mounts
  • 930
  • 0

Cleaned panel & new mounts

Needed more space to move the car around, so this one had to move up.

New clutch bearing
  • 968
  • 0

New clutch bearing

Needed more space to move the car around, so this one had to move up.

LSJ going in
  • 1023
  • 0

LSJ going in

Needed more space to move the car around, so this one had to move up.

LSJ engine in
  • 1221
  • 0

LSJ engine in

Needed more space to move the car around, so this one had to move up.

Hose details 1
  • 958
  • 0

Hose details 1

Needed more space to move the car around, so this one had to move up.

Hose detail 2
  • 954
  • 0

Hose detail 2

Needed more space to move the car around, so this one had to move up.

Hose detail 3
  • 995
  • 0

Hose detail 3

Needed more space to move the car around, so this one had to move up.

Building it up
  • 1060
  • 0

Building it up

All oil and waterhoses connected. SC manifold in, together with som...

Fuel hoses & dual pass connected
  • 1329
  • 0

Fuel hoses & dual pass connected

All oil and waterhoses connected. SC manifold in, together with som...

LSJ Alternator & water tophose
  • 1063
  • 0

LSJ Alternator & water tophose

All oil and waterhoses connected. SC manifold in, together with som...

wiring loom
  • 1408
  • 0

wiring loom

All oil and waterhoses connected. SC manifold in, together with som...

All connected, temporary layout
  • 1024
  • 0

All connected, temporary layout

All oil and waterhoses connected. SC manifold in, together with som...

Temporary airfilter & MAF tube
  • 1113
  • 0

Temporary airfilter & MAF tube

All oil and waterhoses connected. SC manifold in, together with som...

VXT exhaust fitted and ready to run...
  • 1059
  • 0

VXT exhaust fitted and ready to run...

All oil and waterhoses connected. SC manifold in, together with som...

First start-up, outside...
  • 995
  • 0

First start-up, outside...

All oil and waterhoses connected. SC manifold in, together with som...

Running sweet!!
  • 1021
  • 0

Running sweet!!

All oil and waterhoses connected. SC manifold in, together with som...

First drive after clutch bleed
  • 965
  • 0

First drive after clutch bleed

All oil and waterhoses connected. SC manifold in, together with som...

Scanning the engine for hunting idle 1
  • 1116
  • 0

Scanning the engine for hunting idle 1

The idle was hunting with intermediate stalling, so let's see w...

Scanning 2
  • 1024
  • 0

Scanning 2

Put it in closed loop so it regulates with the O2 sensor, already m...

Scanning for fault codes 1
  • 1017
  • 0

Scanning for fault codes 1

Yes, still need to connect the IC pump so that is seen as an error...

IAT log after short burst
  • 1084
  • 0

IAT log after short burst

IAT2 (=intake T manifold) reaching 42*C after 1 single short burst...

Joe's config table parameters
  • 733
  • 0

Joe's config table parameters


Scanner Joe config table & log
  • 682
  • 0

Scanner Joe config table & log


TVS 4th gear pull IAT 2
  • 843
  • 0

TVS 4th gear pull IAT 2

IAT behaviour playing wiith a 2.0 LSJ Harrop (80mm pulley)

EP rollbar 19mm 1
  • 673
  • 0

EP rollbar 19mm 1

Eliseparts 3/4 (19mm) rollbar fitted...

EP rollbar 19mm 2
  • 725
  • 0

EP rollbar 19mm 2


EP rollbar 19mm 3
  • 668
  • 0

EP rollbar 19mm 3


photo1
  • 683
  • 0

photo1


photo2
  • 720
  • 0

photo2


photo3
  • 671
  • 0

photo3


photo4
  • 678
  • 0

photo4


B207R projects...
  • 1125
  • 0

B207R projects...

Some hardware for coming Dutch projects...  

B207R projects
  • 791
  • 0

B207R projects

Some hardware for coming Dutch projects...  

RICA MAHA 2013s
  • 1034
  • 0

RICA MAHA 2013s

Dyno run on MAHA rollers. Z20NET engine, balancer delete, lichtened...





  1. VX220 Owners Club
  2. → Gallery
  3. → Member Albums
  4. → LSJ conversion project
  5. Privacy Policy