What Bhp Is Everyone Running
#301
Posted 23 March 2014 - 12:39 PM
#302
Posted 23 March 2014 - 12:42 PM
#303
Posted 23 March 2014 - 12:45 PM
#304
Posted 23 March 2014 - 01:23 PM
Chris watched the vid and unsure what you're getting at? Couldn't spot much wrong? Also just wondered if you have bottom engine mount inserts when this video was taken? Surprised how much the engine moves as never watched it before.Is your belt tensioner in good order, This caused a boost leak for me You can see it here
#305
Posted 23 March 2014 - 01:39 PM
#306
Posted 23 March 2014 - 01:43 PM
If you listen just before gear changes you will here the issueChris watched the vid and unsure what you're getting at? Couldn't spot much wrong? Also just wondered if you have bottom engine mount inserts when this video was taken? Surprised how much the engine moves as never watched it before.Is your belt tensioner in good order, This caused a boost leak for me You can see it here
#307
Posted 23 March 2014 - 01:45 PM
#308
Posted 23 March 2014 - 06:03 PM
#309
Posted 23 March 2014 - 06:05 PM
#310
Posted 23 March 2014 - 06:07 PM
1. TheHood (193bhp, or 184bhp, or 209bhp) depending on the rolling road.....
2. Karlosfandango (185bhp, 161 lbft)
3. Kev S (181 bhp, 152 lbft) Courtenay 27/3/12
4. Paul H (180)
5. Stane (177 hp , 201 Nm )
6. Mark (162hp at AMD) Estimated now at 342hp with stripes and carbon in place.
7. Yaaan (157.7 bhp, 162.8 lbft)
8. VXRed (165 bhp, 176 lbft)
9. Gizmotron (152 bhp)
10. Nicol (1.45 bhp)
11. Big Steve (148 bhp)
12. insanojackson (145 bhp)
13. Munching Mike - 145 (estimate)
14. Gbobm (about 150 bhp before Nicol fcuked it)
16. Chacha 155.7 bhp @ 5790 rpm, 160.5 lbft @ 4053 rpm (http://tinyurl.com/7q4fcoq
17. Myles 162.5bhp
TURBO:
1. Nev (485 bhp, 400 ft/lb) - Detuned it a bit to 1.35 Bar of boost. - Garrett GTX3071R
2. Dave H (408bhp 375ft/lb)- Garrett 28/67R- 22psi boost- Adaptronic ECU.
3. Fredrik (402 bhp, 340 lbft) - N/A rebuilt to turbo with a Saab engine
4. M3 BFG (365 bhp, 363 lbft
5. Iram (335 bhp, 342ft/lbs). Garrrett GT2860RS
6. Mbes2 - ???
7. Jonnyvx (291BHP - 311 lbft).
8. P11 COV (291bhp, 305lbft)
9. Zx9rjason (290 bhp, 330 lbft)
10. BAZ8465 (288bhp) - Regal rolling road
11. Nicol (286 bhp)
12. Minno (281 bhp) - soon to have a remap!
13. Turbobob (273 bhp) est
14. Gilgamesh (270BHP) Thorney Motorsports Dyno: http://tinyurl.com/7q4fcoq
15. Stigg10 (258.11 bhp, 291.05 lbft) - Courtenay rolling road
16. Salopian (257.10 bhp, 277.40 lbft) - Courtenay rolling road (2006)
17. Joe-Turbo (254.91 bhp, 275.76 lbft) - Courtenay rolling road
18. Relfy (252.4 bhp, 274.1 lbft) - Courtenay rolling road (2013)
19. Nath (251.3 bhp, 267 lbft)
20. VXTyrant (248.9 bhp)
21. spuk87 (241 bhp, 267.7 lbft)
22. UZI lover (241bhp) 301.8 lbft Turbo stage 2 amd map
23. TTony (240 bhp, 250 lbft)
24. WrightStuff (238 bhp)
25. Asheey (268)
26. Notalotus (199 BHP) Phase 2 map and 2.5" Milltek!
27. Bumblebbe (310.1 bhp/342.3 lbft) Dastek Rolling Road
28. Chrisvx220 (259bhp/286lbft) z20leh adaptronics ecu EFI Rolling Road
29. Rickwoo118 (300bhp) CS
30. Dunk (250something bhp) Stage 2 a-la-DG
31. Ebo100 (237bhp) since been mapped by MMG
32. Ormes (243bhp/250lbft) MMG
33. Anz3001 (220bhp/271lbft) dynodaze rollersdynoprint1.pdf
34. Danger7 (387ps 490 Nm/4,100 rpm) GT2871RS, Water/methanol injection, 3" exhaust system - intake mod
35. Manus (253 bhp on the Lotus Europa) and 396 bhp on the Vxt last time is was measured.
VXR:
1. PeterVXR37 (now vxr29) (380 bhp, 356 lbft) Courtenay rolling road - Garrett GT2871?
2. VXR36 (331bhp, 355lbft)
3. Joss no24 (262 bhp 286 lbft) Courtenay rolling road
4. T1oas no47 (249bhp)
5. Ghand VXR 41. (286 bhp 350 lbft.) Courtenay RR
SC:
1. Nick (377bhp) need a new intake manifold
2. haggi961 (313.9 bhp) 262.4 lbft Courtenay RR
3. Chris_uk (306 bhp) actual
4. MaxR (305 BHP) 250 Ibft actual
5. Tailslide (301 bhp)
6. Lee2.2vx 356 bhp 300 lbft
7. Joe (300 bhp)
8. ArticMonkey (265bhp 235lb/ft) Courtenay RR
9. Cliffie (262 bhp) actual
10. Davemate (320+???) Harrop on Dutch software
11. CocoPops 261bhp 225lb/ft
12. Pompey (260 bhp)
13. Seb (256 bhp, 223lbft)
14. FLD guessing at 250 ish
15. Smiley (256bhp, 290nm), CS basemap, 3.35 pully, 2.5" full tullett, stock engine.
16. Hark (251bhp)
17. Stane - Klasen Stage 2 : (241 hp , 296 Nm )
18. Martin s - (256bhp) last rr check.
19. kieranmcc - (250 ish) (300) after the next mapping on a 2.9" pulley
20. Rosssco - (249) bhp
21. Goose - Stage 2 (249bhp, 212lbft)
22. ANARCHY - Stage 1 (210 BHP)
23. Nicol - Stage 2 (258bhp, 218lbft)
24. D3YMO - Stage 2 (262bhp, 220lbft - CMS RR)
25. Paulfuji - Stage 2 (240bhp)
26. V220 DR - stage 2 (255hp,229 lbft)
27. Nemo - stage 2 258bhp
28. Fezzasus - stage 2, 3.1" pulley, Dutch software. 265 bhp, 325 nm. Measured on road.
29. PHB1969 - Stage 2 3.1" pulley 247.95bhp 220 lbft CMS RR
30. Noplex - 265 bhp
31.Chill, Dutch software 3.1 pulley 250-270 bhp dependant on weather conditions
32. Hopegreen - stage 2, Dutch software 3.35 pulley 237bhp, 204lbft - actual (dutch sofware says 264bhp - 284Nm)
ITB:
1.BAre Racing - (292) bhp (249 RWHP)
2. Vocky - (241) bhp
3.. Fab - (226) bhp
4.. Sticky - (205) bhp
5. Joey - (220-230) bhp... hopefully... will confirm in 2 weeks
NA Turbo
Taz6622 255bhp
#311
Posted 23 March 2014 - 06:21 PM
1. TheHood (193bhp, or 184bhp, or 209bhp) depending on the rolling road.....
2. Karlosfandango (185bhp, 161 lbft)
3. Kev S (181 bhp, 152 lbft) Courtenay 27/3/12
4. Paul H (180)
5. Stane (177 hp , 201 Nm )
6. Mark (162hp at AMD) Estimated now at 342hp with stripes and carbon in place.
7. Yaaan (157.7 bhp, 162.8 lbft)
8. VXRed (165 bhp, 176 lbft)
9. Gizmotron (152 bhp)
10. Nicol (1.45 bhp)
11. Big Steve (148 bhp)
12. insanojackson (145 bhp)
13. Munching Mike - 145 (estimate)
14. Gbobm (about 150 bhp before Nicol fcuked it)
16. Chacha 155.7 bhp @ 5790 rpm, 160.5 lbft @ 4053 rpm (http://tinyurl.com/7q4fcoq
17. Myles 162.5bhp
TURBO:
1. Nev (485 bhp, 400 ft/lb) - Detuned it a bit to 1.35 Bar of boost. - Garrett GTX3071R
2. Dave H (408bhp 375ft/lb)- Garrett 28/67R- 22psi boost- Adaptronic ECU.
3. Fredrik (402 bhp, 340 lbft) - N/A rebuilt to turbo with a Saab engine
4. M3 BFG (365 bhp, 363 lbft
5. Iram (335 bhp, 342ft/lbs). Garrrett GT2860RS
6. Mbes2 - ???
7. Jonnyvx (291BHP - 311 lbft).
8. P11 COV (291bhp, 305lbft)
9. Zx9rjason (290 bhp, 330 lbft)
10. BAZ8465 (288bhp) - Regal rolling road
11. Nicol (286 bhp)
12. Minno (281 bhp) - soon to have a remap!
13. Turbobob (273 bhp) est
14. Gilgamesh (270BHP) Thorney Motorsports Dyno: http://tinyurl.com/7q4fcoq
15. Stigg10 (258.11 bhp, 291.05 lbft) - Courtenay rolling road
16. Salopian (257.10 bhp, 277.40 lbft) - Courtenay rolling road (2006)
17. Joe-Turbo (254.91 bhp, 275.76 lbft) - Courtenay rolling road
18. Relfy (252.4 bhp, 274.1 lbft) - Courtenay rolling road (2013)
19. Nath (251.3 bhp, 267 lbft)
20. VXTyrant (248.9 bhp)
21. spuk87 (241 bhp, 267.7 lbft)
22. UZI lover (241bhp) 301.8 lbft Turbo stage 2 amd map
23. TTony (240 bhp, 250 lbft)
24. WrightStuff (238 bhp)
25. Asheey (268)
26. Notalotus (199 BHP) Phase 2 map and 2.5" Milltek!
27. Bumblebbe (310.1 bhp/342.3 lbft) Dastek Rolling Road
28. Chrisvx220 (259bhp/286lbft) z20leh adaptronics ecu EFI Rolling Road
29. Rickwoo118 (300bhp) CS
30. Dunk (250something bhp) Stage 2 a-la-DG
31. Ebo100 (237bhp) since been mapped by MMG
32. Ormes (243bhp/250lbft) MMG
33. Anz3001 (220bhp/271lbft) dynodaze rollersdynoprint1.pdf
34. Danger7 (387ps 490 Nm/4,100 rpm) GT2871RS, Water/methanol injection, 3" exhaust system - intake mod
35. Manus (253 bhp on the Lotus Europa) and 396 bhp on the Vxt last time is was measured.
VXR:
1. PeterVXR37 (now vxr29) (380 bhp, 356 lbft) Courtenay rolling road - Garrett GT2871?
2. VXR36 (331bhp, 355lbft)
3. Joss no24 (262 bhp 286 lbft) Courtenay rolling road
4. T1oas no47 (249bhp)
5. Ghand VXR 41. (286 bhp 350 lbft.) Courtenay RR
SC:
1. Nick (377bhp) need a new intake manifold
2. haggi961 (313.9 bhp) 262.4 lbft Courtenay RR
3. Chris_uk (306 bhp) actual
4. MaxR (305 BHP) 250 Ibft actual
5. Tailslide (301 bhp)
6. Lee2.2vx 356 bhp 300 lbft
7. Joe (300 bhp)
8. ArticMonkey (265bhp 235lb/ft) Courtenay RR
9. Cliffie (262 bhp) actual
10. Davemate (320+???) Harrop on Dutch software
11. CocoPops 261bhp 225lb/ft
12. Pompey (260 bhp)
13. Seb (256 bhp, 223lbft)
14. FLD guessing at 250 ish
15. Smiley (256bhp, 290nm), CS basemap, 3.35 pully, 2.5" full tullett, stock engine.
16. Hark (251bhp)
17. Stane - Klasen Stage 2 : (241 hp , 296 Nm )
18. Martin s - (256bhp) last rr check.
19. kieranmcc - (250 ish) (300) after the next mapping on a 2.9" pulley
20. Rosssco - (249) bhp
21. Goose - Stage 2 (249bhp, 212lbft)
22. ANARCHY - Stage 1 (210 BHP)
23. Nicol - Stage 2 (258bhp, 218lbft)
24. D3YMO - Stage 2 (262bhp, 220lbft - CMS RR)
25. Paulfuji - Stage 2 (240bhp)
26. V220 DR - stage 2 (255hp,229 lbft)
27. Nemo - stage 2 258bhp
28. Fezzasus - stage 2, 3.1" pulley, Dutch software. 265 bhp, 325 nm. Measured on road.
29. PHB1969 - Stage 2 3.1" pulley 247.95bhp 220 lbft CMS RR
30. Noplex - 265 bhp
31. Chill, Dutch software 3.1 pulley 250-270 bhp dependant on weather conditions
32. Hopegreen - stage 2, Dutch software 3.35 pulley 237bhp, 204lbft - actual (dutch sofware says 264bhp - 284Nm)
33. Steve.i.am - stage 2, CS map, 3.3 pulley, std exhaust with Miltek turbo back box. 252bhp, 217lbft.
ITB:
1. BAre Racing - (292) bhp (249 RWHP)
2. Vocky - (241) bhp
3. Fab - (226) bhp
4. Sticky - (205) bhp
5. Joey - (220-230) bhp... hopefully... will confirm in 2 weeks
NA Turbo
Taz6622 255bhp
#312
Posted 12 April 2014 - 06:42 PM
1. TheHood (193bhp, or 184bhp, or 209bhp) depending on the rolling road.....
2. Karlosfandango (185bhp, 161 lbft)
3. Kev S (181 bhp, 152 lbft) Courtenay 27/3/12
4. Paul H (180)
5. Stane (177 hp , 201 Nm )
6. Mark (162hp at AMD) Estimated now at 342hp with stripes and carbon in place.
7. Yaaan (157.7 bhp, 162.8 lbft)
8. VXRed (165 bhp, 176 lbft)
9. Gizmotron (152 bhp)
10. Nicol (1.45 bhp)
11. Big Steve (148 bhp)
12. insanojackson (145 bhp)
13. Munching Mike - 145 (estimate)
14. Gbobm (about 150 bhp before Nicol fcuked it)
16. Chacha 155.7 bhp @ 5790 rpm, 160.5 lbft @ 4053 rpm (http://tinyurl.com/7q4fcoq
17. Myles 162.5bhp
TURBO:
1. Nev (485 bhp, 400 ft/lb) - Detuned it a bit to 1.35 Bar of boost. - Garrett GTX3071R
2. Dave H (408bhp 375ft/lb)- Garrett 28/67R- 22psi boost- Adaptronic ECU.
3. Fredrik (402 bhp, 340 lbft) - N/A rebuilt to turbo with a Saab engine
4. M3 BFG (365 bhp, 363 lbft
5. Iram (335 bhp, 342ft/lbs). Garrrett GT2860RS
6. Mbes2 - ???
7. Jonnyvx (291BHP - 311 lbft).
8. P11 COV (291bhp, 305lbft)
9. Zx9rjason (290 bhp, 330 lbft)
10. BAZ8465 (288bhp) - Regal rolling road
11. Nicol (286 bhp)
12. Minno (281 bhp) - soon to have a remap!
13. Turbobob (273 bhp) est
14. Gilgamesh (270BHP) Thorney Motorsports Dyno: http://tinyurl.com/7q4fcoq
15. Stigg10 (258.11 bhp, 291.05 lbft) - Courtenay rolling road
16. Salopian (257.10 bhp, 277.40 lbft) - Courtenay rolling road (2006)
17. Joe-Turbo (254.91 bhp, 275.76 lbft) - Courtenay rolling road
18. Relfy (252.4 bhp, 274.1 lbft) - Courtenay rolling road (2013)
19. Nath (251.3 bhp, 267 lbft)
20. VXTyrant (248.9 bhp)
21. spuk87 (241 bhp, 267.7 lbft)
22. UZI lover (241bhp) 301.8 lbft Turbo stage 2 amd map
23. TTony (240 bhp, 250 lbft)
24. WrightStuff (238 bhp)
25. Asheey (268)
26. Notalotus (199 BHP) Phase 2 map and 2.5" Milltek!
27. Bumblebbe (310.1 bhp/342.3 lbft) Dastek Rolling Road
28. Chrisvx220 (259bhp/286lbft) z20leh adaptronics ecu EFI Rolling Road
29. Rickwoo118 (300bhp) CS
30. Dunk (250something bhp) Stage 2 a-la-DG
31. Ebo100 (237bhp) since been mapped by MMG
32. Ormes (243bhp/250lbft) MMG
33. Anz3001 (220bhp/271lbft) dynodaze rollersdynoprint1.pdf
34. Danger7 (387ps 490 Nm/4,100 rpm) GT2871RS, Water/methanol injection, 3" exhaust system - intake mod
35. Manus (253 bhp on the Lotus Europa) and 396 bhp on the Vxt last time is was measured.
VXR:
1. PeterVXR37 (now vxr29) (380 bhp, 356 lbft) Courtenay rolling road - Garrett GT2871?
2. VXR36 (331bhp, 355lbft)
3. Joss no24 (262 bhp 286 lbft) Courtenay rolling road
4. T1oas no47 (249bhp)
5. Ghand VXR 41. (286 bhp 350 lbft.) Courtenay RR
SC:
1. Nick (377bhp) need a new intake manifold
2. haggi961 (313.9 bhp) 262.4 lbft Courtenay RR
3. Chris_uk (306 bhp) actual
4. MaxR (305 BHP) 250 Ibft actual
5. Tailslide (301 bhp)
6. Lee2.2vx 356 bhp 300 lbft
7. Joe (300 bhp)
8. ArticMonkey (265bhp 235lb/ft) Courtenay RR
9. Cliffie (262 bhp) actual
10. Davemate (320+???) Harrop on Dutch software
11. CocoPops 261bhp 225lb/ft
12. Pompey (260 bhp)
13. Seb (256 bhp, 223lbft)
14. FLD guessing at 250 ish
15. Smiley (256bhp, 290nm), CS basemap, 3.35 pully, 2.5" full tullett, stock engine.
16. Hark (251bhp)
17. Stane - Klasen Stage 2 : (241 hp , 296 Nm )
18. Martin s - (256bhp) last rr check.
19. kieranmcc - (250 ish) (300) after the next mapping on a 2.9" pulley
20. Rosssco - (249) bhp
21. Goose - Stage 2 (249bhp, 212lbft)
22. ANARCHY - Stage 1 (210 BHP)
23. Nicol - Stage 2 (258bhp, 218lbft)
24. D3YMO - Stage 2 (262bhp, 220lbft - CMS RR)
25. Paulfuji - Stage 2 (240bhp)
26. V220 DR - stage 2 (255hp,229 lbft)
27. Nemo - stage 2 258bhp
28. Fezzasus - stage 2, 3.1" pulley, Dutch software. 265 bhp, 325 nm. Measured on road.
29. PHB1969 - Stage 2 3.1" pulley 247.95bhp 220 lbft CMS RR
30. Noplex - 265 bhp
31. Chill, Dutch software 3.1 pulley 305 Pk 327 NM
32. Hopegreen - stage 2, Dutch software 3.35 pulley 237bhp, 204lbft - actual (dutch sofware says 264bhp - 284Nm)
33. Steve.i.am - stage 2, CS map, 3.3 pulley, std exhaust with Miltek turbo back box. 252bhp, 217lbft.
ITB:
1. BAre Racing - (292) bhp (249 RWHP)
2. Vocky - (241) bhp
3. Fab - (226) bhp
4. Sticky - (205) bhp
5. Joey - (220-230) bhp... hopefully... will confirm in 2 weeks
NA Turbo
Taz6622 255bhp
Edited by CHILL Gone DUTCH, 12 April 2014 - 06:43 PM.
#313
Posted 12 April 2014 - 10:31 PM
#314
Posted 12 April 2014 - 10:39 PM
#315
Posted 13 April 2014 - 12:59 AM
Edited by oakmere, 13 April 2014 - 01:01 AM.
#316
Posted 15 April 2014 - 01:08 PM
I have another remap in May so looking forward to seeing what I can make
#317
Posted 15 April 2014 - 03:54 PM
I think you should do the sc list LukeAnybody want a fun job and put these all in order lol
#318
Posted 18 April 2014 - 07:09 AM
Vocky give us a an update with the large capacity engine of have you not had the remap yet? I will add to the list after a RR confirmation of the OBD software.
I am waiting for a Pro5 ECU upgrade before it gets the final mapping, Webcon have not completed the Stack dash temperature signal yet.
#319
Posted 18 April 2014 - 07:22 AM
Do you want/need a PIC to control the temperature signal?
#320
Posted 18 April 2014 - 09:26 AM
Do you want/need a PIC to control the temperature signal?
but that would require me having to do something on my vx
3 user(s) are reading this topic
0 members, 3 guests, 0 anonymous users