96 replies to this topic

[Andrew aka Stuwy]

DAMN THATS

[ollo]

Thanks stuwy, it´s nice that you like the lights. Is anyone interested in buying the the vx carbon fibre taillight set? Cheers Olli

[ollo]

[font="arial, helvetica, sans-serif;"]Hy, after many years of testing and searching for the original Harnessplugs, the taillights are allready available.[/font]

 

 

[font="arial, helvetica, sans-serif;"][color=#000000;]Scope of delivery[/color][color=#000000;]:[/color][/font]

 

[font="arial, helvetica, sans-serif;"][color=#000000;]•[/color][color=#000000;] Opel Speedster Vauxhall VX220[/color] Carbon fiber tail light left and right high-gloss painted or prepared for body color
• 6x threaded rod incl. Nuts for mounting and optimal adjustment to the vehicle
• 2x Hella Premium LED flashing light clear yellow with 12 Power LEDs
• 2x Hella LED ring closure and red brake light with 16 Led's
• 2x Hella design reflector red
• 1x Hella design fog light red
• 1x Hella design reverse light clear
• 1x Hella flasher (independent of load)
• 2x handmade harness for connection to the module Hella lights and the original vehicle side harness[/font]

 

[font="arial, helvetica, sans-serif;"][color=#000000;]It[/color][/font][color=#000000;] must[/color] be no changes or soldered anything on the vehicle, your vehicle side harness remains unchanged, simply connect the harness of OLSN Carbon taillights on the original connector of the vehicle harness, replace flasher unit to the supplied load independent flasher ...... and there you go! !

[color=#000000;]The price[/color] incl. VAT and account for one set fully assembled Carbon rear lights incl. Commissioning of all parts is € 1,299.00

 

[font="arial, helvetica, sans-serif;"]Actually 2 Sets of the Taillights are in Stock and can be delivered at once.[/font]

 

[font="arial, helvetica, sans-serif;"]We send worldwide, if anyone´s interested please send us an email.[/font]

 

Cheers Olli

 

[Gedi]

Can you do them in GRP as well? It might be interesting to see them bonded and blended into a clam, then have the whole thing painted.

[CocoPops]

Taken from a different thread and using different light units etc but similar to your request Gedi?

[Gedi]

Taken from a different thread and using different light units etc but similar to your request Gedi?

 

 

Yeah, that's exactly what I was thinking of. There might be more interest in those than the CF stuff.

[ollo]

Can you do them in GRP as well? It might be interesting to see them bonded and blended into a clam, then have the whole thing painted.

 

Hy Gedi, on the first page of this Thread you can see the Pictures were the taillights are mounted on a Opel Speedster.

 

Our Taillights can be fitted on your car without any change on your car. The lights are allready painted and fully mounted, so you can install them to your car put the Plugs to your wiring vehicle harness change your flasher unit and start your engine.

You have to do no paintjob, our lights are ready for use.

 

The Price in GRP is 1019,65 plus shipping.

Edited by ollo, 05 November 2014 - 12:25 PM.

[fezzasus]

[font="arial, helvetica, sans-serif;"]Hy, after many years of testing and searching for the original Harnessplugs, the taillights are allready available.[/font]

 

 

 

I could have saved you a lot of time! http://www.polevolt....Connectors.html

[haggi961]

Which version is needed for front and rear tom?

[fezzasus]

I think it's the 6W but don't quote me on that, it is for the fronts. 

[ollo]

@ fezzasus...thanks man..at the beginning of 2014 we found a seller for those plugs.

 

Here are some Pictures of the equipped Taillights!!

 

 

[Gorbachov]

I think these look great. Will have a set when I have the money spare.....

[TheRealVXed]

The price has gone up a bit since 2011....

[fezzasus]

TBH, with the parts going into it, it's a reasonable price.

[anz3001]

For me, they look great on the shelf, not so on the car. May look better on a brighter car but I think blended and painted is the best option

[slindborg]

What's the red, brown, blue cable for going from the back to the top? Is it for the outer ring element?

[GFWilliams]

I'm thinking it'd look good if the LED lights were inside a modified original housing...

[The Batman]

I'm tempted.. Although I think they look pants on a standard Vx

[smiley]

I'm thinking it'd look good if the LED lights were inside a modified original housing...

 

Yes, something fancy like this looks tempting:

[slindborg]

I'm thinking it'd look good if the LED lights were inside a modified original housing...

 
Yes, something fancy like this looks tempting:

That is actually sexy!!!