83 replies to this topic

[robin]

The second photoshop is spot on the position is more like what im thinking to follow the lines a bit more closely Thanks for another picture

[StealthVXT]

The second photoshop is spot on the position is more like what im thinking to follow the lines a bit more closely
Thanks for another picture

If you want the shape changing any more just let me know. I am bored at work so it helps relieve some, even if only for a few moments.

[haggi961]

I really like that and great photo editing skills there. I am really interested if you can build them like that robin. What sort of price would you think they would be if you did make some up?

[techieboy]

What sort of price would you think they would be if you did make some up?

now the price i would guess price would be about £100 mark so if intrested please put name down or any sugestions remarks welcome

[haggi961]

My bad i must of missed the price at the start lol

[The Batman]

123mm from the light unit is safe

[robin]

Would 122mm be ok joe?

[The Batman]

No anything more than 123 is ok anything less is boot!

[fred666]

If your going to make vents like this i think the minimum requirement is to tie them in and line them up with the OEM lines, the top lines needs to be a few cm lower to mate up with the number plate recess

good idea though, although not for me. Ive done similar on the front...

but the rear on the vx is almost perfect i think.

[The Batman]

[techieboy]

What's the off-white bit at the outermost edge of the cut outs Joe? Is that GRP?

[MartinS]

Theres strengtheing angled section that is fixed up against the rear bodywork, to cut the holes we had to remove that, but the rear is still very solid. Martin s

[Muncher]

What's the off-white bit at the outermost edge of the cut outs Joe? Is that GRP?

That's the bit of GRP which the arch liner attaches to.

[MartinS]

Theres strengtheing angled section that is fixed up against the rear bodywork, to cut the holes we had to remove that, but the rear is still very solid. Its main purpose seems to be a gravel and mud store, as I reckon nearly half a kilos worth came out when I cut mine out! Martin s

[fred666]

If those rear vents had a lip/recessed edge rather than just a cutout of the clam id love them.

[techieboy]

Theres strengtheing angled section that is fixed up against the rear bodywork, to cut the holes we had to remove that, but the rear is still very solid.
Its main purpose seems to be a gravel and mud store, as I reckon nearly half a kilos worth came out when I cut mine out!

Wondered if it was that but couldn't visualise it going that far back.

Same as that. Lost count of how many times I've had to dig rubbish out of there. No bloody wonder the fixings there, disintegrate.

[FLD]

If those rear vents had a lip/recessed edge rather than just a cutout of the clam id love them.

I agree. Having said that, martin has pressed his mesh into shape and I think that makes the world of difference. C'mon martin, piccie

[Darcini]

If those rear vents had a lip/recessed edge rather than just a cutout of the clam id love them.

Would be straight forward to incorporate into the moulding I would of thought, maybe to echo the bevelled edge around the lights.

[The Batman]

I preferred flat I will take another picture now they are stuck in as above isn't just a few blobs to hold in place. But I prefer the flat look

Edited by joe_589, 19 July 2011 - 01:01 PM.

[FLD]

If those rear vents had a lip/recessed edge rather than just a cutout of the clam id love them.

Would be straight forward to incorporate into the moulding I would of thought, maybe to echo the bevelled edge around the lights.

Is this related to your wanted add??!!