831 replies to this topic

[The Batman]

Wreelybro, on 17 Mar 2014 - 7:19 PM, said:

Fast road clutch cover from CS didn't fit new flywheel 3 of the holes where too small for the studs to fit through had to get the drill out and enlarge the cover holes. (Bit sloppy from CS seeing how much it cost! )

All ttv are like this

[Zoobeef]

Yeah had to drill my standard clutch too. The fuel smell is an upside not downside

[techieboy]

Zoobeef, on 17 Mar 2014 - 7:29 PM, said:

The fuel smell is an upside not downside

 

Only if you're car isn't parked in a nice airtight garage and you're not a smoker.

[Zoobeef]

There is that.

[Wreelybro]

techieboy, on 17 Mar 2014 - 7:30 PM, said:

Zoobeef, on 17 Mar 2014 - 7:29 PM, said:

The fuel smell is an upside not downside

  Only if you're car isn't parked in a nice airtight garage and you're not a smoker.

Not a smoker but may leave alone if you get fuel smell.

[Sticky]

Wreelybro, on 17 Mar 2014 - 7:21 PM, said:

Any downside to changing to carbon canister pipe work?

Vocky does a halfway house mod that won't leave you with a fuel smell but removes a few of the pipes. I can take a pic if you want

[Wreelybro]

The Batman, on 17 Mar 2014 - 7:24 PM, said:

Wreelybro, on 17 Mar 2014 - 7:19 PM, said:

Fast road clutch cover from CS didn't fit new flywheel 3 of the holes where too small for the studs to fit through had to get the drill out and enlarge the cover holes. (Bit sloppy from CS seeing how much it cost! )

All ttv are like this

Just the Clutch cover needed modding not the flywheel.

[Zoobeef]

Saying that my garage doesnt smell of fuel it just smells of a car.

[Wreelybro]

Think I should say at this point Coral bought the flywheel for me. (Think I'll keep her a bit longer lol)

[Wreelybro]

Mine smells of painted floor

[Wreelybro]

Sticky, on 17 Mar 2014 - 7:37 PM, said:

Wreelybro, on 17 Mar 2014 - 7:21 PM, said:

Any downside to changing to carbon canister pipe work?

Vocky does a halfway house mod that won't leave you with a fuel smell but removes a few of the pipes. I can take a pic if you want

Yes please!

[Sticky]

Wreelybro, on 17 Mar 2014 - 7:44 PM, said:

Sticky, on 17 Mar 2014 - 7:37 PM, said:

Wreelybro, on 17 Mar 2014 - 7:21 PM, said:

Any downside to changing to carbon canister pipe work?

Vocky does a halfway house mod that won't leave you with a fuel smell but removes a few of the pipes. I can take a pic if you want

Yes please!

Ok. Give me a few mins.

[Sticky]

How about these Matt?

 

(Not used Flickr before)

 

https://www.flickr.c.../120689277@N06/

[Wreelybro]

Cheers Nick will take a look at my piping tomorrow.

[Sticky]

Wreelybro, on 17 Mar 2014 - 9:49 PM, said:

Cheers Nick will take a look at my piping tomorrow.

No problem. If you need different angles let me know.

[Wreelybro]

Which way around does the oil cooler go? The one I took off didn't have the water flow sticker on. Plus didn't take any pics of his part and where the oil pipes go.

[Zoobeef]

I can have a look at mine tomorrow if I can see it from above. Unless you get an answer before then.

[Sticky]

Too late for pics tonight Matt, sorry.

[Zoobeef]

Found the answer. http://www.vx220.org...tion/?hl=cooler

[Wreelybro]

Cheers fellas. So from this looking from the back of the car the arrow points from left to right on the oil cooler? (opposite to how it is in the pic.)