Albrex Tuning ?
#1
Posted 22 April 2003 - 05:55 AM
Gforce did you find out any info on this stuff on the meet ?
http://www.pixum.de/...d90a7ee7330d1c4
John.
#2
Posted 22 April 2003 - 10:00 AM
Word up ! Every Body say ! when you hear the call you gotta get it underway !
#3
Posted 22 April 2003 - 06:17 PM
???Word up ! Every Body say ! when you hear the call you gotta get it underway !
Am I missing something out here in Switzerland?
Agree about the treatment of the original exhaust outlet area being clumsy.
This one from MS-Design is neater, but don't ask about the price!
Attached Files
#4
Posted 22 April 2003 - 07:05 PM
#5
Posted 22 April 2003 - 07:14 PM
#6
Posted 22 April 2003 - 08:51 PM
#7
Posted 22 April 2003 - 08:58 PM
#8
Posted 23 April 2003 - 07:05 AM
#9 Guest_Guest (Guest)
Posted 24 April 2003 - 05:33 PM
On the page from the link I posted, I think this is it:couldnt find the exhaust details on their website
I dont think 800 quid odd for a new rear bumper is too bad as longs as its already colour coded
Links / Rechtsanlage 90mm Edelstahlrohre mit Raceline Logo 1055.02 EUR    ÂÂ
It is made by or at least for MS Design. There was an article about this car in the mag
"Opel Club & Trend" No. 5 August/September 2002. There it states that it's a stainless steel unit with four endpipes from MS Design.
Doubt very much if the rear panel is colour-coded. Even the new factory-fitted boot spoiler for the Turbo isn't according to information in Switzerland. One N/A owner here has already ordered one and says it's so.
#10
Posted 24 April 2003 - 05:35 PM
#11
Posted 25 April 2003 - 08:25 AM
http://www.geiers.de...r/c/Gruber.html
I have just noticed that it is done by www.motortuning.com and they specialise in serious machinery and are not cheap, I wouldn't be surprised if this did not cost over 5000 euros to install, take a look at the tuners gallery pics - a quick F50
Oh. and I hate to admit I was also a Cameo fan - word up Bob!! or this post is a bit 'back and forth, back and forth'
#12
Posted 30 April 2003 - 12:43 AM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users