Edited by GF ORCE8, 19 November 2012 - 07:13 PM.
Front Lens Covers, Aftermarket Production
#1
Posted 19 November 2012 - 07:12 PM
#2
Posted 19 November 2012 - 07:14 PM
#3
Posted 19 November 2012 - 07:15 PM
#4
Posted 19 November 2012 - 07:17 PM
#5
Posted 19 November 2012 - 07:19 PM
#6
Posted 19 November 2012 - 07:19 PM
#7
Posted 19 November 2012 - 07:21 PM
Edited by GF ORCE8, 19 November 2012 - 07:21 PM.
#8
Posted 19 November 2012 - 07:21 PM
#9
Posted 19 November 2012 - 07:23 PM
#10
Posted 19 November 2012 - 07:25 PM
Get in and finally someone has done it, cant wait to replace these crappy vx lights This had made my day.
#11
Posted 19 November 2012 - 07:28 PM
#12
Posted 19 November 2012 - 07:29 PM
Get in and finally someone has done it, cant wait to replace these crappy vx lights This had made my day.
You shouldn't have stuck that silly sh*t on them, in the first place.
#13
Posted 19 November 2012 - 07:31 PM
#14
Posted 19 November 2012 - 07:39 PM
Get in and finally someone has done it, cant wait to replace these crappy vx lights This had made my day.
You shouldn't have stuck that silly sh*t on them, in the first place.
Very true for the first set of lights i had and when i put the film on (lesson learnt) but ive had them resprayed since then and they look really good but iv want the standard look again. So ive bought some more and they still steam up after i split them and resealed them. There the only thing on the vx that i really hate and to the point sometimes i could sell the bloody vx because of them. In my life i must of split and resealed vx lights around 10 times and each time it never seems to work. I suppose this is fun of the vx
#15
Posted 19 November 2012 - 07:58 PM
#16
Posted 19 November 2012 - 08:01 PM
#17
Posted 19 November 2012 - 08:11 PM
This sounds really good await with interest!Hi all,
I would like to announce, that I am in the final phase of reproducing the front lens covers for our beloved VX220.
I am awaiting the final prototypes by end of next week, and will show off the pictures right after this.
there will be 2 versions available to choose from:
1) "Full -spec" with hardcoated surface (scratch and stone chip resistans just as OE one) and E-MARK!!!!
2) low budget "track-version" w/o hardcoating and aas a result w/o E-MARK
BOTH versions, will include following features:
100% clear and smooth surface, quality checked in "light chamber" prior to delivery
black sourrounding as OE part
same thickness like OE part
I will update this page with more info like pricing and so on very soon.
Stay tuned
best regards
OH: forgot to mention, rears will follow soon.
#18
Posted 19 November 2012 - 08:14 PM
Very true for the first set of lights i had and when i put the film on (lesson learnt) but ive had them resprayed since then and they look really good but iv want the standard look again. So ive bought some more and they still steam up after i split them and resealed them.
See, we told you OEM was they way ahead.
I suppose this is fun of the vx
Ain't that the truth.
#19
Posted 19 November 2012 - 09:47 PM
Version Full Spec, hardcoated WITH E-Mark (!) 189 € / side, complete set 378 €; in GBP around:147 / side; 295 / set
Version Low Spec, w/o hardcoating, w/o E-Mark: 129 € / side, complete set 258 €; in GBP around: 100 / side; 200 / set
Procedure: 50 % prepayment => start of production, full payment as soon as ready for shipment => shipment
When arguing about the pricing, please consider that the quality is TOP, and was priority #1 rather then a cheap "homemade" pricing.
To get an idea of the quality, here a reference picture. What´s good for the works Mini Countryman WRCs is just fine for our VX I think
Minimum combined (version 1+2) order QTY will be 15 full sets to kick it off. As this is also running in the german forum, it really shouldnt be a problem to reach the minimum.
SO, preorders are accepted.
Delivery will be according to order-order
OK, but that´s enough for now. Will postr more infos as soon as I can give some proper info on the final covers by means of how they look like
Best regards
#20
Posted 19 November 2012 - 09:57 PM
Edited by Aimy, 19 November 2012 - 10:00 PM.
3 user(s) are reading this topic
0 members, 3 guests, 0 anonymous users