The new home for my car finally have somewhere to stay. :-)
, Per
Posted 25 February 2020 - 07:52 PM
The new home for my car finally have somewhere to stay. :-)
, Per
Posted 26 February 2020 - 08:57 AM
The new home for my car finally have somewhere to stay. :-)
, Per
Silver speedy?
Posted 27 February 2020 - 05:53 PM
Yes for my silver Speedster
The new home for my car finally have somewhere to stay. :-)
, Per
Silver speedy?
Posted 05 March 2020 - 06:11 PM
Still no Garage but a house. :-)
Moving in in beginning of July, looking forward so much now beeing without a house and a garage (and my freedom) for about 1 year now.
:-)
Posted 05 March 2020 - 06:47 PM
Per... nice
Posted 06 March 2020 - 06:56 AM
Was already wondering if you had made an underground concrete bunker
Bye, Arno.
Posted 06 March 2020 - 07:53 PM
Thank you.
Per... nice
Posted 06 March 2020 - 07:54 PM
yhea I know we were a bit slow getting the house up. :-)
House will be painted dark grey in April May something.
I dont know when they will start working on the garage, soon I hope.
Br, Per
Was already wondering if you had made an underground concrete bunker
Bye, Arno.
Posted 19 March 2020 - 06:02 AM
Big congratulations on the new house Per
Now that you have the chance, don't fill up the garage with lots of junk, no lawn mowers, no bikes, no skiiing stuff and most important of all; no building projects. Buy a pop up tent from 24mx or something instead if you must
I could post a picture of my garage as a warning but then none of you lot would talk to me again if you saw what my car has to live with
Posted 22 March 2020 - 05:56 PM
Thank you for the advice :-) , but we dont have any additional space for garden equipment now it the beginning. This will be buildt during next year a storage for bikes and guarden Equipment.
I guess it will take 3 years untill we are "ready" with Everything.
Last friday I just Heard because of COVID-19 they prioritize the house and take the garage later, Meaning if a lot of ppl get sick I need to wait with the garage :-(
Big congratulations on the new house Per
Now that you have the chance, don't fill up the garage with lots of junk, no lawn mowers, no bikes, no skiiing stuff and most important of all; no building projects. Buy a pop up tent from 24mx or something instead if you must
I could post a picture of my garage as a warning but then none of you lot would talk to me again if you saw what my car has to live with
Posted 04 April 2020 - 07:14 PM
I need some help.
When i did the electronics on my car a few years ago I wrote it down on a paper and was going to save it digitally later.
But I never found my notes so need help with this red cable.
Does the electric scheme show the same thing? Going to brown 30.
Sorry I have forgott all my electric scheme reading skills since.
Reality
Digitally
Br, Per
Posted 06 April 2020 - 06:47 PM
Getting some advices online I will need to rethink my wiring a bit shown on the picture.above.
Yesterday I was in the garage trying to understand the problem I had last year when car was didnt run well
And I needed to drive 110km home in limpmode in 60km/h after a trackday.
I tested my ECU in Another car and it ran just nice, beein told my EU Cold been damaged.
Anyway I found this, I really hope this is the problem and I dont need to change the ECU, because I just want to drive the damn thing this summer.
lucky me I bought a replacement connector with Cables, they are a bit short now.
Next question, my roof seal have gone a bit shorter.
Anyone know where or which one to buy that fits?
,Per
Posted 06 April 2020 - 06:47 PM
Getting some advices online I will need to rethink my wiring a bit shown on the picture.above.
Yesterday I was in the garage trying to understand the problem I had last year when car was didnt run well
And I needed to drive 110km home in limpmode in 60km/h after a trackday.
I tested my ECU in Another car and it ran just nice, beein told my EU Cold been damaged.
Anyway I found this, I really hope this is the problem and I dont need to change the ECU, because I just want to drive the damn thing this summer.
lucky me I bought a replacement connector with Cables, they are a bit short now.
Next question, my roof seal have gone a bit shorter.
Anyone know where or which one to buy that fits?
,Per
Posted 06 April 2020 - 06:56 PM
speak to jon seal, he will be able to to supply you with some roof seal
Posted 06 April 2020 - 07:49 PM
Ehm, thats sounds logic. :-)
speak to jon seal, he will be able to to supply you with some roof seal
Posted 30 April 2020 - 08:20 PM
I thought about ordering new springs to my Gaz Monos and I dont have. my car around in the flat I´m living in. :-)
And I don´t remember the dimensions of the springs.
I´m 93% sure they are ID 2.25", 6" (152,4mm) long for front and 7" (177.8mm) long for the rear.
Can someone confirm this?
Br, Per
Posted 15 June 2020 - 07:23 PM
Latey I have finally got som time for the car and not only for the hose.
House painted and porch beeing finalized.
Last year I had my rear wing mounted high and had the idea of taking it of between track Days, but this never happend
So I took the decision to make a lower mount to avoid attention from the police.
So some static simulation in the CAD and lowering by 20 mm
Made them 20% lighter and just as strong as previous version.
Then I had to 3d print them so I got test assemble the wing again.
After test trial I have done some small ajustments
and below water cut new vs old.
A lot of things can be 3D printed. I wasnt happy with my old cup holder so here is a new.
I found this heater box on ebay in good condition.
The hard thing is to change it.
I did a RHD to LHD conversion but since all parts were not longer produced I did a half conversion, kept some parts in OEM posistion.
BR, Per
Posted 15 June 2020 - 09:28 PM
very nice house and clever design for the wing.
I´ve been thinking these covid months to swapping to k24 but looks a hard conversion
Posted 16 June 2020 - 03:58 PM
Thank you, House will be ready in 2 weeks time.
The hardest part with the conversion is you need to fabricate things yourself.
To get Everything to run smooth you need some time to fully test the car.
Br, Per
very nice house and clever design for the wing.
I´ve been thinking these covid months to swapping to k24 but looks a hard conversion
Posted 16 June 2020 - 05:05 PM
Thank you, House will be ready in 2 weeks time.
The hardest part with the conversion is you need to fabricate things yourself.
To get Everything to run smooth you need some time to fully test the car.
Br, Per
very nice house and clever design for the wing.
I´ve been thinking these covid months to swapping to k24 but looks a hard conversion
Presume you can use driveshafts from a Honda Elise (Toyota) and maybe the front torque mount..?
0 members, 2 guests, 0 anonymous users