2116 replies to this topic

[Exmantaa]

Ecu has a unique ID number. (Not the immobiliser code, as that can be erased and paired to another immo unit.)

[slindborg]

Was thinking more from "chooning" as in others get their ecu done and I go fiddle using their ID for their ecu.

[CHILL Gone DUTCH]

Ok I'm ready to role Peter has sent me details for payment does anyone no if you can make international payments online I've never made international payment before

Edited by Chill, 25 March 2013 - 08:41 PM.

[rik]

i was able to do it online with natwest just like a normal transfer, cost £10 i think though

[CHILL Gone DUTCH]

Which version of software do we download

[CHILL Gone DUTCH]

payment made and ECU in the post tomorrow

[Goosenka]

:: and good luck

Edited by Goosenka, 25 March 2013 - 09:26 PM.

[CHILL Gone DUTCH]

Peter has received my ECU and he will send it back on Tuesday

Edited by Chill, 30 March 2013 - 05:39 PM.

[smiley]

Version 2.5 has been released.

• Better support for wideband sensor.
• A learning fuel session will also update the Idling fuel table.
• Full throttle fuel cells can be automatic calculated when wideband sensor is connected.
• Correction of air temperature reading when Bosch TMAP sensors are used.
• Manual updated.

Software and manual at obdtuner.com

Edited by smiley, 31 March 2013 - 08:05 PM.

[CHILL Gone DUTCH]

That's the 1 I've got cant wait now to bring the whole thing together, Should have the ECU later next week The hardest thing is to find in Dutch the English settings

[smiley]

The hardest thing is to find in Dutch the English settings

Last item in the menu bar is called Algemeen (general)
Then click Instellingen (settings)
Change top dropdown option from Nederlands to Engels.
Then click OK. Language should change instantly.

Edited by smiley, 31 March 2013 - 08:11 PM.

[CHILL Gone DUTCH]

Yes I went through every tab before I found the right 1 Got there eventually How long you had the ECU

Edited by Chill, 31 March 2013 - 08:29 PM.

[smiley]

How long you had the ECU

I'm an early adapter.
Had version 1 with my 2.4 inlet kit, and ran 2.0 on my SC kit since beta.

[oakmere]

2.5 also allows for open loop idle. I am currently experimenting with this to try and find the best settings. Still a working progress to get good settings not as straight forward as I first thought. Closed loop compensates all the time which covers up any issues with the idle mapping. The open loop stops my lumpy idle so will try to get this right!

[slindborg]

2.5 also allows for open loop idle. I am currently experimenting with this to try and find the best settings. Still a working progress to get good settings not as straight forward as I first thought.
Closed loop compensates all the time which covers up any issues with the idle mapping. The open loop stops my lumpy idle so will try to get this right!

As per the pm, chuck in more ign advance at idle, you can put lots in down there safely.

[Exmantaa]

Yeah, good idle with the Ecotec can be tricky and if you have hotter cams (less efficient @ idle), put some more advance in. The O2 sensor distance in a VX does not help in closed loop... (And also with the LSJ ecu the idle needs attention, but I have a bit more idle tables to play with. )

Edited by Exmantaa, 01 April 2013 - 11:19 PM.

[JimmyJamJerusalem]

Out of interest guys how much does this cost?

[ArticMonkey]

Out of interest guys how much does this cost?

£750

[CHILL Gone DUTCH]

It's 850 Euros so what ever the exchange rate is, I bought mine last week and including international payment charge it was near £800

[oakmere]

As per the pm, chuck in more ign advance at idle, you can put lots in down there safely. I have done this now. Back to closed loop with more advance I will see how it settles down. It already had more advance than standard but have added about 2.5 (not sure if the values are in degrees?) more this seems the best setting and I am getting better vacuum. If i keep adding advance idle starts to get worse until it becomes unstable. Peter will be getting sport cams so I am sure he will be looking at this in more detail.