2116 replies to this topic

[CHILL Gone DUTCH]

Not sure you will gain much power without adding hardware, But you will gain a bit of torque and lose flat spot.

[smiley]

Imo not worth the money without other major mods. spot on on charged cars.

[TFD]

OBD on itself is not worth it powerwise, I understand. Question was including the basic mods like 2.4 IM / 2"5 exhaust. The basic fuzz some years ago on the dutch forum was these mods could get it to 200 bhp. Now  the power-o-meter seems adjusted / calibrated on a hubdyno but I don't see anyone with new powerfigures.

 

So wondering what the "real" powerfigures are. 

 

@Smiley: Car is running great again so will be visiting you for a cuppa soon to get the parts back 

 

Edited by TFD, 16 October 2014 - 07:23 PM.

[smiley]

So wondering what the "real" powerfigures are. 

 

@Smiley: Car is running great again so will be visiting you for a cuppa soon to get the parts back 

 

I had obdtuner 1.0 when I was NA with a 2.4 and and a miltek cat with janspeed end muffler. 

It made about 171 on the dyno.

On the obdtuner forum there is a guy chasing top NA power going near 200 (with headwork done)

 

Main reason you don´t see many NA tuning is because exmantaa started doing affordable SC conversions since 2011, so most power hungry guys switched to that.

 

Feel free to drop by. Don´t wait to long if you want to try my stage 3 SC while the roads are still dryisch and the car is not in the shop for some major overhaul.

[s-express]

I have an NA with Peter's ecu producing 196 after being professionally setup on a proper r/road.

head work, cams, Z22YH pistons & rods.

Very smooth power (too smooth if anything!)

 

[speedster]

@ s-express what are the torque figures? Got a chart?

[wizzard8]

main mods: full headwork catcams fast road 65mn throttle body modded dbilas intake 4-2-1 exhaust manifold itg maxogen obdtuner v2.x

Attached Files

•  post-494-0-34656500-1409512057.jpg   52KB   8 downloads

[speedster]

Nice delivery. What mods to the dbilas?

[wizzard8]

adapted the throttle body including o-ring sealing. ported runners and planned the flange to the the engine.

Edited by wizzard8, 16 October 2014 - 09:33 PM.

[speedster]

OK. That done. Did you think about raising the compression ratio?

[wizzard8]

it is. about 11:1

[don.hasi]

@ s-express: and which cams do you have?

[speedster]

it is. about 11:1

Cool. Whats giving you 11:1? Skimmed some off the cylinder head?

[NickB787]

wonder if he has the z22yh pistons? nice straight line

[wizzard8]

head is skimmed. standard internals so I rev only 7200rpm. seems that there would some more usable Power above.

[s-express]

@ s-express what are the torque figures? Got a chart?

Will go have a look in a minute, btw forgot a few mods:

2.4 TB

LSJ injectors

2.4 inlet mani

Tullet mani & system 2.5"

Piper fast road cams

 

along with the already stated Z22YH rods/pistons, diy head work, etc

[haggi961]

Dutch software equals flames lol

[teamdefcon]

What's the current price for the dutch software?

[teamdefcon]

What's the current price for the dutch software?

[fezzasus]

Same price it's always been. 875 euros