127 replies to this topic

[CHILL Gone DUTCH]

Put your name on list, What size do you want

[CHILL Gone DUTCH]

Is it too late to get in on this?! Sat on the fence a bit, but now toying with the idea of more poke

What size do you want put your name on list I'm ordering these Monday so you will have to send me the money and we should be a bit cheaper for everyone because we now have 5 Everyone else is sending me £530 if you do the same I will knock it of P&P and duties ( this for everyone if we get 5 people

Edited by CHILL Gone DUTCH, 06 October 2013 - 04:16 PM.

[CHILL Gone DUTCH]

Is it too late to get in on this?! Sat on the fence a bit, but now toying with the idea of more poke

If your tuning your original engine artic monkey (stu) has a set he can sell you then he can buy the 86.0 mm size which will mean he doesn't have to bore his brand new saab out

[CHILL Gone DUTCH]

If you all send me £530

Have PMed payment details
I will have all the money and a bit more to order and have them sent to my address,
When they arrive I will pay the duties and then ask for the remainder of the balance from you all for your part of the duties and any P&P that May or may not be needed to get the products from me to you.
If I don't receive the money for the duties and P&P I will sell your pistons and rods to recoup my money.

If you agree to these terms put your name on the list below.

1. Chill[color=#ff0000;]Organising (payment alrerady in my account)[/color]
2. Westkenbrit      [color=#ff0000;]payment received[/color] 
3. 2deano5           [color=#40e0d0;]paying tomorrow[/color]
4 stig                      [color=#ff8c00;]NOT HEARD BACK YET[/color]
5. Niclow                possible No 5 if he gets his finger out


Sorry about this but I don't want to get stuck with pistons and rods and a bill for the duties.
 
 

Edited by CHILL Gone DUTCH, 06 October 2013 - 05:08 PM.

[ArticMonkey]

Is it too late to get in on this?! Sat on the fence a bit, but now toying with the idea of more poke

Pm sent with an offer.

[CHILL Gone DUTCH]

If you all send me £530

Have PMed payment details
I will have all the money and a bit more to order and have them sent to my address,
When they arrive I will pay the duties and then ask for the remainder of the balance from you all for your part of the duties and any P&P that May or may not be needed to get the products from me to you.
If I don't receive the money for the duties and P&P I will sell your pistons and rods to recoup my money.

If you agree to these terms put your name on the list below.

1. Chill[color=#ff0000;]Organising (payment alrerady in my account)[/color]
2. Westkenbrit      [color=#ff0000;]payment received[/color] 
3. 2deano5           [color=#40e0d0;]paying tomorrow[/color]
4 stig                       [color=rgb(255,0,0);]payment received[/color]
5. Niclow                possible No 5 if he gets his finger out


Sorry about this but I don't want to get stuck with pistons and rods and a bill for the duties.
 
 
 

Edited by CHILL Gone DUTCH, 06 October 2013 - 07:49 PM.

[nicollow]

Sorry to d1ck everyone about, but I better take a reality check and resist. Im thinking of potentially selling next spring/summer too, so best not get stuff sat around tempting me to throw more money at the car   

[2deano5]

If you all send me £530

Have PMed payment details
I will have all the money and a bit more to order and have them sent to my address,
When they arrive I will pay the duties and then ask for the remainder of the balance from you all for your part of the duties and any P&P that May or may not be needed to get the products from me to you.
If I don't receive the money for the duties and P&P I will sell your pistons and rods to recoup my money.

If you agree to these terms put your name on the list below.

1. Chill[color=rgb(255,0,0);]Organising (payment alrerady in my account)[/color]
2. Westkenbrit      [color=rgb(255,0,0);]payment received[/color] 
3. 2deano5           [color=rgb(0,255,0);]payment sent[/color]

4. stig                   [color=rgb(255,0,0);]payment received[/color]
5. Niclow              possible No 5 if he gets his finger out


Sorry about this but I don't want to get stuck with pistons and rods and a bill for the duties.

 

[CHILL Gone DUTCH]

If you all send me £530

Have PMed payment details
I will have all the money and a bit more to order and have them sent to my address,
When they arrive I will pay the duties and then ask for the remainder of the balance from you all for your part of the duties and any P&P that May or may not be needed to get the products from me to you.
If I don't receive the money for the duties and P&P I will sell your pistons and rods to recoup my money.

If you agree to these terms put your name on the list below.

1. Chill[color=rgb(255,0,0);]Organising (payment alrerady in my account)[/color]
2. Westkenbrit      [color=rgb(255,0,0);]payment received[/color] 
3. 2deano5            [color=rgb(255,0,0);]payment received[/color]
4. stig                   [color=rgb(255,0,0);]payment received[/color]


Sorry about this but I don't want to get stuck with pistons and rods and a bill for the duties.
 
 

Edited by CHILL Gone DUTCH, 07 October 2013 - 12:07 PM.

[CHILL Gone DUTCH]

Pistons and rods are now ordered they will despatched within 5 working days GB closed

[CHILL Gone DUTCH]

Pay pal exchange rate was not as good as expected but will sort this out when we have pistons and rods ( it's only a few quid more each)

[CHILL Gone DUTCH]

[color=rgb(40,40,40);font-family:helvetica, arial, sans-serif;]delivery process[/color]

 

 

Location Date Local Time Activity Louisville, KY, United States 10/10/2013 23:52 Arrival Scan Orlando, FL, United States 10/10/2013 22:03 Departure Scan   10/10/2013 20:10 Arrival Scan Longwood, FL, United States 10/10/2013 19:57 Departure Scan   10/10/2013 19:17 Origin Scan Castle Donnington, United Kingdom 10/10/2013 23:15 Package data processed by brokerage Waiting for clearance / Released by Clearing Agency. Now in-transit   10/10/2013 23:15 Package data processed by brokerage Waiting for clearance United States 10/10/2013 18:03 Order Processed: Ready for UPS

 

if you can make head or tail of the time differences.

 

 

Edited by CHILL Gone DUTCH, 11 October 2013 - 08:41 AM.

[CHILL Gone DUTCH]

We have had a delivery people

[Bill SC]

Can't see the pic on my work computer - Are they SHINY..!!!???

[CHILL Gone DUTCH]

They are very nice,

Would anyone like to guess the duties

[CHILL Gone DUTCH]

Can everyone let me know where you want them delivering,
I will be going to Vocky's at some point to have some work done to my engine porting etc blank plates etc
So maybe if your having your engine built there I could take them

Edited by CHILL Gone DUTCH, 14 October 2013 - 05:01 PM.

[Bill SC]

Vocky is doing mine too so if you are going there in the next couple of weeks then if you could drop mine off that would be top. What do we owe you for duties dude..?

[CHILL Gone DUTCH]

Vocky is doing mine too so if you are going there in the next couple of weeks then if you could drop mine off that would be top. What do we owe you for duties dude..?

Only paid a estimated dutie bill at moment ?? It was a lot less than I originally thought it was going to be ?? What were you expecting the dutie to be

[Bill SC]

No idea.... I suppose somewhere up to 20% Can't say I've imported much so really not a clue. Can't remember how much the harrop was....

[CHILL Gone DUTCH]

I was expecting up to £150 according to the dutie calculator on Google including VAT but it came in less than a third of that, but it does say on the bill the charges may differ from estimate, which is what I have already paid