176 replies to this topic

[fezzasus]

Hold on. Are you saying you can't connect to the ECU when you could before? That would point to the ECU being at least partially fcuked. Have you spoken to Peter?

[CHILL Gone DUTCH]

He still should be able to get the lead working without it connected to car

[fezzasus]

He still should be able to get the lead working without it connected to car

 

Yup, which is why i'm questioning if it's an issue with the ECU

[CHILL Gone DUTCH]

He still should be able to get the lead working without it connected to car

  Yup, which is why i'm questioning if it's an issue with the ECU

Not sure that he has got the lead working can you confirm its working tip

[TIP]

i have connected with ANOTHER laptop, (my dads which i used when installing the SC)  I have never managed to get any of my computers to talk to the ECU.

 

before I talk to peter I want to try my dads laptop again (will see him next Sunday)

 

the device manager keeps giving the same error "code 10"

[fezzasus]

Have you put the passcode into the software? 

[haggi961]

Try these drivers if you have the elm 327 as the drivers you have don't look like the right ones http://www.totalcard...d-obd2-software

[haggi961]

Has anyone got the EGR input rates for the software using a Aem wideband ?

My bad posted this in the wrong forum and should of been the dutch software thread.

[TIP]

Try these drivers if you have the elm 327 as the drivers you have don't look like the right ones http://www.totalcard...d-obd2-software

those are the ones I have been using

[TIP]

Have you put the passcode into the software? 

 

yes.

 

even with the cable disconected I get the same error

 

"This device cannot start. (Code 10)

 

A device which does not exist was specified."

[CHILL Gone DUTCH]

I would get the cable working first before connecting to car Have you tried 9600 bit rate

[haggi961]

The drivers your using doesn't look like the Silicon Labs CP210x USB to UART Bridge drivers?

[oakmere]

Get an old win xp netbook. I have never had an issue and no driver required as the cable Just auto installed.

Edited by oakmere, 11 January 2015 - 06:44 PM.

[oakmere]

ASUS Eee Pc £35 delivered

[TIP]

Get an old win xp netbook. I have never had an issue and no driver required as the cable Just auto installed.

 

Thats what I originally did (samsung n150 £40 on ebay)as I didnt want my 19" superdupa laptop banging around the garage ..but could not get that to work either 

 

 

however the good news is ....... I finally got connected WOOOHOOO!!!

 

had to completely uninstall ALL usb devices,host controllers everything! and start again , that time it worked 

 

had the following error codes (which did not show up on my cheap ebay reader)

P1120

P1516

P1523

P1220

 

cleared them and she even fired up (or at least tried to) but then there was no more electricity (been trying a fair bit today) so shes on charge and I will try again later.

 

fingers crossed thats solved it but no counting chickens until the old bird sings (to mix a metaphor)

 

thank you everyone.

 

gotta love the .org community   

[CHILL Gone DUTCH]

👍

[fezzasus]

P1120

P1516

P1523

P1220

 

 

Classic loom of doom faults.