216 replies to this topic

[ChrisS1]

...and they've arrived.

[vxt5]

Whats the problem with the centre caps as im not able to fit the wheels for a while Sent from my SM-G928F using Tapatalk

[ChrisS1]

The centre caps are fine on the front, but not deep enough on the rear to accommodate the driveshaft nut.

 

They have a deeper cap available so they have posted two of these out to me today so I can check that they fit ok. Assuming they do they will order a batch of these in the correct colour for us.

 

I'll take photos of the cap once I get it, assuming it fits!  

[vxt5]

Cheers chris sounds good and they look very nice � Sent from my SM-G928F using Tapatalk

[vxt5]

Im guessinv the centre caps ive recieved in the post are to fit the rear wheels?? Sent from my SM-G928F using Tapatalk

[Jimmy-Boy]

Anyone got these fitted yet? 

[vxt5]

Search for "rota titans fitted" there is a thread Sent from my SM-G928F using Tapatalk

[Ponk]

Hi guys,

 

Am I right in thinking you went for 17" x 7.5 and 17" x 9 in the end? I've read the 11 odd pages and it looks like you went back and forth a bit.

 

I'm pretty keen to contact rare rims in a month or two but I wanted to make sure I ended up with the same spec. What size tyres are people running on them?

[EvilChap]

These are all now sold.  They were 17x7.5 5x110 ET20 and 17x9 5x110 ET30 - they were done in Hyper Silver and Slate Grey.  Eliseparts 'might' have a set left in stock, possibly.

I was thinking of offering another one, but maybe in 16" / 17" and another wheel design...

 

 

These might appeal more to the trackday / performance people?

Edited by EvilChap, 06 February 2017 - 01:44 PM.

[Ponk]

Ah nuts. I was hoping they would be available off the shelf at the RRP once the moulds had been made.

 

Interested in the 16/17s but not looking to purchase for a couple of months.

[EvilChap]

If you give Eliseparts a shout they may have a set on the shelf - certainly worth a go as they bought the unsold sets from that delivery

[Ali87]

Ah nuts. I was hoping they would be available off the shelf at the RRP once the moulds had been made.   Interested in the 16/17s but not looking to purchase for a couple of months.

http://www.vx220.org...y/#entry1904162

[CHILL Gone DUTCH]

These are all now sold.  They were 17x7.5 5x110 ET20 and 17x9 5x110 ET30 - they were done in Hyper Silver and Slate Grey.  Eliseparts 'might' have a set left in stock, possibly.

I was thinking of offering another one, but maybe in 16" / 17" and another wheel design...

 

 

These might appeal more to the trackday / performance people?

 

could this possibly happen ??

16/17

 

9j rear 7.5 front ?

[Aerodynamic]

Is anyone interested in a new group buy with Rota Titan?

 

I´d like to have a set.

 

Br, Per

[Matt_182]

I'd be interested if they could do a 16/17 setup

[CHILL Gone DUTCH]

There is a other thread For a 16/17 setup Put your name down if we get enough intrested it can be done

[CHILL Gone DUTCH]

http://www.vx220.org...ans-1617-split/