14 replies to this topic

[DanGT]

Hi all,

Having a clear out and got some VX bits for sale I hope will be of use to someone. If anyone wants pictures give me a shout, offers accepted on all of it, all prices plus postage.

Eaton M62 supercharger, rotors need recoating £150
Front V grill, silver. ok condition. Can plastidip black for cost if required £30
S2 Exige S suspension, low miles £200
Lightweight plastic rocker cover Z22se £30
Exhaust manifold heatshield £5
Turbo alloys, good condition with decent but old tyres £150
Standard alternator £20
Z22se Inlet manifold £10
Z22se throttle body £20
Rear subframe brace bar (will need to drill subframe) £30
LSJ coolant pump bracket £5
LSJ 6 rib crank pulley £20
LSJ injectors £40
LSJ fuel rail/pipes £10
Original VX NA suspension, not leaking but tired. Good for MOT or temporary £25
K&N airfilter £5

If I find anymore bits i'll add them in

[abnvx220]

Hi, I'd like to take the rear brace bar please if it's one which connects the rear tie-rod mounting points. Could you post pictures? Thanks, Robert

[abnvx220]

Also interested in the Exige suspension if it will fit a vx220.

[abnvx220]

Also interested in the Exige suspension if it will fit a vx220.

[iain3915]

I've PM'd you about the front V grill.  Thanks

[oz2044]

Hi I'm interested in the NA tired suspension. Could you send me a couple of pics please? Thanks 😊

Sent from my SM-G998B using Tapatalk

[hairy]

Also interested in the Exige suspension if it will fit a vx220.

 

Yes it will - I have one fitted.

[DanGT]

Thanks for the interest, emails coming to everyone who has messaged.

Dan

[DanGT]

Hi, I'd like to take the rear brace bar please if it's one which connects the rear tie-rod mounting points. Could you post pictures? Thanks, Robert

I can send you pictures but its not one that connects to the inner toe links. It mounts inboard of them which would require drilling of the subframe. I bought it but never fitted it

[DanGT]

Also interested in the Exige suspension if it will fit a vx220.

S2 Exige suspension fits the VX, the front ride height will be higher than standard however, so people use dropper brackets on the top damper mount to remedy this. I have a set available but they have been modified (welded and re-drilled) to give the car a lower ride height. I think it was 110mm but can't remember now

[abnvx220]

Thanks for the replies. I was after a brace to strengthen the inner toe links and 110mm is too low for me so I'll leave both the brace and suspension. 

[adamvx220]

Hi mate pmd about 3 minutes after posted on forum but had no reply can you get back to me.

thanks Ad

[DanGT]

Replied

[blackoctagon]

I'd like the LSJ injectors, please.

[edit] PM'd

Edited by blackoctagon, 30 July 2021 - 01:57 PM.

[double r]

pm'd