17 replies to this topic

[Ivor]

Is it just me that has problems with wiper motors, just had another fail, had been professionally repaired, but lasted only a couple of years and a few 1000 miles. Have a spare which is installed but I may have found a cheap new solution, just need to work out the wiring and check the wiper mechanism fits the motor...the wiper mounting is identical

[Ivor]

As a guide, to refurbish the motors cost me £300 each, the new motor I've found cost around £50 if that .

[Ivor]

https://www.imagebam.com/view/ME10NZ74

[Ivor]

How do I post the image not the link ?

[Ivor]

<a href="https://www.imagebam.com/view/ME10NZ74" target="_blank"><img src="https://thumbs4.imagebam.com/92/be/f8/ME10NZ74_t.jpg" alt="IMG_20250329_063748313_HDR.jpg"/></a>

[Ivor]

Ivor, on 29 Mar 2025 - 07:08 AM, said:

<a href="https://www.imagebam.com/view/ME10NZ74" target="_blank"><img src="https://thumbs4.imag...ME10NZ74_t.jpg" alt="IMG_20250329_063748313_HDR.jpg"/></a>

That didn't work

[stevieturbo]

Trying to post your image, the forum reports "You are not allowed to use that image extension on this community."

 

 

Old posts suggest a Citroen AX was the same....although that's probably just as hard to find these days.

The motor itself, many motors all look largely the same, same mounts etc. I haven't taken mine out of the VX as it works, but motors I've changed on my Corsa/Combo van years ago do look pretty identical.

[stevieturbo]

I've uploaded to postimage to test if it works 

 

Have you a photo of the wiring connector ?

 

do this, I've added lots of spaces to try and prevent it working so you can see the text.  [  img  ] https://i.postimg.cc...ME10-NZ74-o.jpg   [   /   img   ]

 

 

 

Edited by stevieturbo, 29 March 2025 - 09:02 AM.

[Ivor]

stevieturbo, on 29 Mar 2025 - 08:59 AM, said:

I've uploaded to postimage to test if it works

Have you a photo of the wiring connector ?

do this, I've added lots of spaces to try and prevent it working so you can see the text. [ img ] https://i.postimg.cc...ME10-NZ74-o.jpg [ / img ]

Great , thanks

[Ivor]

Will post pics of wiring connectors and my thoughts in next few days

[stevieturbo]

Also....what is failing ? Is it the motor itself, or the head that has some control over movement and positioning ?

 

If the motor, I'm sure you could probably swap the motor.

 

for reference then, just took mine. I thought I had an old Corsa one lying about, but can't find it. Only the linkage. Can't recall which way the motor faces, but I think it's to the right, and face down

 

 

 

Corsa for reference, similar vintage as the VX, although totally different connector, but still 5 pins and their mode of operation is pretty much the same as an old Corsa

 

https://www.ebay.co....tm/143159175015

[Ivor]

It's the motor that fails, damage from water ingress

[Ivor]

stevieturbo, on 29 Mar 2025 - 09:44 AM, said:

Also....what is failing ? Is it the motor itself, or the head that has some control over movement and positioning ?

If the motor, I'm sure you could probably swap the motor.

for reference then, just took mine. I thought I had an old Corsa one lying about, but can't find it. Only the linkage. Can't recall which way the motor faces, but I think it's to the right, and face down





Corsa for reference, similar vintage as the VX, although totally different connector, but still 5 pins and their mode of operation is pretty much the same as an old Corsa

https://www.ebay.co....tm/143159175015

Just wondering if I can take the motor rotor out of the cheap motor and put it in my VX one, might be the internal electronics that are damaged tho, will take them apart next week

[stevieturbo]

Corsa 

 

What is it actually doing ( or not doing )  ? Have you tried testing anything ? or applying power to the motor directly ?

 

 

Edited by stevieturbo, 29 March 2025 - 12:01 PM.

[Ivor]

stevieturbo, on 29 Mar 2025 - 12:00 PM, said:

Corsa

What is it actually doing ( or not doing ) ? Have you tried testing anything ? or applying power to the motor directly ?

Motor does not turn, definitely the motor as I've replaced it with a spare and it's fine now. So I've a broken one I'm ok with dismantling to see if I can get the new one from a different vehicle, different connector, to work

[hairy]

Ivor, on 29 Mar 2025 - 10:11 AM, said:

It's the motor that fails, damage from water ingress

 

It's all that welsh rain

[KurtVerbose]

Ivor, on 29 Mar 2025 - 10:11 AM, said:

It's the motor that fails, damage from water ingress

 

Mine failed years ago from water ingress and I noticed a tear of the plastic below the windscreen through which water was running onto the wiper motor. I taped it up pending a more permanent repair, but it's still got the tape.

 

There should also be a plastic cover over the wiper motor.

Edited by KurtVerbose, Yesterday, 08:22 PM.

[Ivor]

KurtVerbose, on 31 Mar 2025 - 8:17 PM, said:

Ivor, on 29 Mar 2025 - 10:11 AM, said:

It's the motor that fails, damage from water ingress

Mine failed years ago from water ingress and I noticed a tear of the plastic below the windscreen through which water was running onto the wiper motor. I taped it up pending a more permanent repair, but it's still got the tape.

There should also be a plastic cover over the wiper motor.

The plastic cover is in place