419 replies to this topic

[mags993tt]

Coming along nicely

[speedylove]

Ouahhhhhhh I'm amazed!! it's fantastic!!

[Ducati996Senna]

Dude, any chance of taking a picture of the way you've mounted the 2 pot AP's onto the rear upright.

[dude]

Dude,

any chance of taking a picture of the way you've mounted the 2 pot AP's onto the rear upright.

can´t get a clear pic when it´s mounted.

i had to make mayor changes and machining/welding to get them there and it´s not possible to put the std rear-ones back again.
i also had to give up the handbrake. but who want´s that on a racecar

//anders

[Ducati996Senna]

Thanks anyway Anders.

[dude]

here´s the latest updates. we have started the shell mounting and making of the new fasteners. can´t decide if i wan´t the dzus-one (it´s a lot more work fitting) or just plain screws (fast and easy).

[dude]

forgot the pic

Attached Files

•  karossmontering_p__bil1.JPG   129.44KB   0 downloads

[dude]

lightweight doorlockdevice

Attached Files

•  d_rr_insida_med_l_s.JPG   102.17KB   0 downloads

[Ricky2772]

are you keepin' those fugly'n heavy rear mirrors?!?

[dude]

are you keepin' those fugly'n heavy rear mirrors?!?

WTF!!!!!!!

of course. gotta put some weight on, so the car stays on the ground
they will be changed, but not now.

the wing will be in place next time i take some pics

[caleebra]

Awesome dude, awesome

[Ducati996Senna]

Anders, what size discs are you using on the front and rear?

[dude]

Anders,

what size discs are you using on the front and rear?

i use the std-ones 288mm.

[Ducati996Senna]

Thanks Anders, I'm suprised you haven't used the largest possible. The 2 pot AP can accomodate up to 295mm. Youv'e done the hard work by adapting the rear upright to accept the radial mount. All you would need is a 3-4 mm spacer. Not sure what your front 4 pot will accomodate. Depending on the type it can be anything from 304-330mm. Do you intend to use a servo? Heaven forbid!!

[dude]

Thanks Anders,

I'm suprised you haven't used the largest possible. The 2 pot AP can accomodate up to 295mm. Youv'e done the hard work by adapting the rear upright to accept the radial mount. All you would need is a 3-4 mm spacer. Not sure what your front 4 pot will accomodate. Depending on the type it can be anything from 304-330mm.
Do you intend to use a servo? Heaven forbid!!

the 15" wheels can´t take more than 290mm with the ap5000+ calipers.
i have only 2mm clearence between rim and caliper now.

in the rear i have 15mm clearence, but the breakbalance would be changed too much with bigger discs.


servo???

[Ducati996Senna]

Ahh! didn't realise you were going down to 15" front wheel.

[dude]

here is a few pics of the body and it almost is ready for painting

Attached Files

•  snett_fram_med_skiva.jpg   156.77KB   0 downloads

[dude]

had to adjust my HT for the cage

Attached Files

•  plastning_tak.jpg   110.29KB   0 downloads

[dude]

inside

Attached Files

•  plastning_insida_tak.jpg   142.1KB   0 downloads

[dude]

lightreplacements

Attached Files

•  plastning_lysen.jpg   139.39KB   0 downloads