96 replies to this topic

[Baron Von Scubadaddy]

I have been toying with the idea of doing the rears White

[kieran_lightning]

Yeah i was thinking of doing the fronts in yellow same as the body then painting the silver bits black Hmmmmm

[JawZ]

Dibbas old racer

[kieran_lightning]

Dibbas old racer

any pics of the front????

[Baron Von Scubadaddy]

I'm not sure there's some thing wrong maybe the silver should have gone black

[A2UL69]

Dibbas old racer

any pics of the front????

Try here Clicky

[Baron Von Scubadaddy]

Still not convinced also the rear lens is missing off that car .

[Crimson_Killa]

im toying with the idea of body coloured and then white where the silver is as per my stripes....

[kieran_lightning]

anybody painted the inside body colour yet ??? I really want to but a little unsure at the minute

[Kanary]

Hello I am very intersted by the mod and i have bought all the needs But i have some questions. For exemple Baron says that the lights can be put in oven with 100°C during 10minutes. Is it ok for the rear AND the front light ? The lights are easy desassemblated or they must be puted many times in the oven ? The fronts lights have all the electrical cables and caoutchouc parts. How did you do with them ? Difficult to desassemblate ? Thanks Christophe

Edited by Kanary, 23 December 2007 - 08:38 AM.

[Kanary]

Hello Anybody can help me Christophe

[Anarchy]

Oops got the cooking instructions mixed up with my turkey:

Edited by Anarchy, 26 December 2007 - 12:20 PM.

[mandarinvx]

Hello
Anybody can help me

Christophe

The rears should be fine in the oven as they have no wiring or metal parts, I'm not convinced about the fronts, so you may be best with a heat gun and a sharp knife, resealing with Tiger Seal.
When you put them in the oven it may be best to increase the temperature up gradually from around 80 degrees and keep checking them

[framauro]

I'm going to try something different and do my lights on my George Foreman grill.

[p4cks]

I must say that I'm not convinced that colour coded lights will look any good. I'll be painting mine black at some point though. <adds to ever-growing list>

[MEAGY]

Can i just say to everyone to be very carefull doing this as i tried to remove cover on a rear that was half off & letting loads of water in so i thought i`d take it off completely & re-seal it but it split while removing now ive got to get another light!! Raving to say the least.....

[vauxhallade]

Just wondered if the Heat gun is used on the Glass part of light to break the seal????? Any one know? thanks ADE