555 replies to this topic

[techieboy]

Fitted a special sticker for you as well, Garry.

[The Batman]

ear protection must be worn

edit - hold on a second thats worrying

Edited by joe_589, 08 June 2009 - 01:57 PM.

[PaulCP]

Finally got my 2.5" system fitted. Car is at Courtenays at the moment so that the mapping can be adjusted but initial thoughts 1. Seems to rev easier & not as much SC whine 2. Not as noisy as Munchers 3" system 3. Pretty quiet on cruise 4. A bit more boomy than the Milltek system when accelerating hard but not uncomfortably noisy inside the car with roof on Will try to get some Db tests done asap

[The Batman]

munchers system is loud then?

Edited by joe_589, 08 June 2009 - 02:01 PM.

[NickB787]

Fitted a special sticker for you as well, Garry.

Looking good Matt, be interesting to hear the results of the back box

[Muncher]

munchers system is loud then?

Was always going to be louder than a smaller diametered system but it is not indecently loud.

Paul - mine got noticeably quieter in any case once I had put some decent miles on it.

[The Batman]

have you got an acurate reading from a track yet?

[NickB787]

have you got an acurate reading from a track yet?

I am still after a drive bye myself

[The Batman]

uf static is 93 im sure you wont have a problem nick

[NickB787]

uf static is 93 im sure you wont have a problem nick

No me neither but would like the info out there for other people who might consider one of Jims systems.

[The Batman]

next bedford meet at the autodrome for sound testing then!

[Thorney]

Sorry for hold up, been busy at week end. Been speaking to two suppliers and one is even prepared to do them at cost to help us do this, people in this industry do not like how Tullet have acted and are willing to help. We are looking to build 50, in one batch to the same design (we have the jig). One thing that has been raised is seeing how this all came about one supplier said "do you trust the jig now?" and he has a point, we just picked it up the day after I had the conversation with Chris so it makes sense to build one and check it fits and thats what we are doing. As for TMS losing money on this and isn't it a crap idea, well yes it is, I'd rather we didn't have to, I'd rather we just supplied the ones we designed with Tullet but at this miraculously cheaper pirce they seem to have found but seeing as their view is somewhat different we have little choice. I'd rather lose £12k of my own money and make a point than not, its a question of honour. Laugh all you want, doubt all you want, sneer all you want but this will be sorted and you will benefit.

[PiperRS]

Matt Thats okay, im aware of the new build so take your time. Joe wont mind waiting.... lol. Love the sticker Brilliant, but your paint seems to have run into many shades of blue... Garry

[The Batman]

you go girl thorney

plus if you fancy chucking some extra money my way, i will be happy to take it off ya

as its a credit crunch any chance of a discount? say 20% for a group buy? £160 if i can find 40 people?

let me know

[Muncher]

It's miraculously cheaper because it's a better design and takes less time to produce, with fewer welds. It's hilarious that you're now suggesting he has tampered with your jig in any way to spite you, what's the point in that? Chris has acted absolutely professionally, done nothing wrong and there's only one person who looks a prat when they start to throw mud just because someone else has dared to make something off their own back.

[SteveM]

1. rcvaughan 2. joe_589 3. Sticky 4. The Fat Man 5. chrisculpt 6. Windy Miller 7. Chris_uk 8. PiperRS 9. Cliffie 10.Rocky 11. Darrylb 12. crazyfrog 13. EdButler 14. Jameshs 15. XXX 16. Sicey 17. VXR 43 18. Flashash123 19. m4t7y 20. TIP 21. Drpau 22. cthomas443 23. Stefan_A 24. Davemate 25. 2-20 26. Robin 27. AndyJay 28. FreeStyleWave 29. FLD 30. R20BY_M 31 lightning024 ill have one too 32. gb170 yep me too 33. Chazuwe 34. SWORKS 35. Mandarinvx 36. Covert Ops. 37. Morgan9122 (mine's OE's developed a crack!!) 38. Ouchie 39. AMOSS 40. SteveM

[jules_s]

It's miraculously cheaper because it's a better design and takes less time to produce, with fewer welds.

It's hilarious that you're now suggesting he has tampered with your jig in any way to spite you, what's the point in that?

Chris has acted absolutely professionally, done nothing wrong and there's only one person who looks a prat when they start to throw mud just because someone else has dared to make something off their own back.

I dont have an axe to grind either way here munch....

But are you trying to say (diplomatically) that tullets can/will make a 4-1 equal branch manifold that will marry to a Milltek for circa £388?

TBH I dont really care about the costs here within reason....I was just seeking some clarification about where we all stand here within the percieved mud slinging

[Muncher]

Sorry jules, I forgot to include the VAT. Here are the full prices. The 2.5" 4-1 equal length manifold will fit any system which has a standard flange position (so all of them really).


2.5" 4-1 Equal length Manifold £446.64 INC VAT
2.5" Downpipe with cat £342.65 INC VAT
2.5" Silencer £451.56 INC VAT

Complete system = £1,240.85 INC VAT




3" 4-1 Equal length Manifold £457.86 INC VAT
3" Downpipe with cat £368.20 INC VAT
3" Silencer £463.06 INC VAT

Complete system = £1,289.12 INC VAT

Edited by Muncher, 08 June 2009 - 10:07 PM.

[Sutol]

1. rcvaughan 2. joe_589 3. Sticky 4. The Fat Man 5. chrisculpt 6. Windy Miller 7. Chris_uk 8. PiperRS 9. Cliffie 10.Rocky 11. Darrylb 12. crazyfrog 13. EdButler 14. Jameshs 15. XXX 16. Sicey 17. VXR 43 18. Flashash123 19. m4t7y 20. TIP 21. Drpau 22. cthomas443 23. Stefan_A 24. Davemate 25. 2-20 26. Robin 27. AndyJay 28. FreeStyleWave 29. FLD 30. R20BY_M 31 lightning024 ill have one too 32. gb170 yep me too 33. Chazuwe 34. SWORKS 35. Mandarinvx 36. Covert Ops. 37. Morgan9122 (mine's OE's developed a crack!!) 38. Ouchie 39. AMOSS 40. SteveM 41. Sutol May aswell be one of the 50 then

[siztenboots]

and of course these wonder cheap manifolds will be made from unobtainium