Attached Files
-
Cams.jpg 30.48KB
0 downloads
Vx220 N/a Cam Availability
Started by
clipping_point
, Mar 25 2004 12:12 PM
183 replies to this topic
#1
clipping_point
-
-
- 4,908 posts
Scary Internerd
- Location:Linköping, Sweden
Posted 25 March 2004 - 12:12 PM
No much is known from the choices of great men like Rubber, PaulCP, PaulB. Here's their chance to enlighten us.
#3
paulb
-
-
- 1,598 posts
Billy No Mates
- Location:Cambridgeshire
- Interests:Driving, wildlife photography, travel
Posted 25 March 2004 - 01:27 PM
I believe AmD cams are no higher lift than standard but longer duration. I think they are of the order of 260 degrees but I am not certain.
#4
clipping_point
-
-
- 4,908 posts
Scary Internerd
- Location:Linköping, Sweden
Posted 25 March 2004 - 01:43 PM
OK! Haven´t found lift and duration of the standard cam either. Both inlet AND outlet cam lobes are of course of interest.
#5
clipping_point
-
-
- 4,908 posts
Scary Internerd
- Location:Linköping, Sweden
Posted 25 March 2004 - 01:53 PM
Price?I believe AmD cams are no higher lift than standard but longer duration. I think they are of the order of 260 degrees but I am not certain.
#6
dude
-
-
- 1,404 posts
Billy No Mates
- Gender:Male
- Location:stockholm/sweden
Posted 25 March 2004 - 03:04 PM
got my std and the mantapart racecams measured today by a camdesigner.
std-cams at 0.050" 171,8 degree and 0.23472" camlift
op1148ec at 0.050" 236.2 degree and 0.29528" camlift
(crower)
he laughed and wondered if i was going to use them on the street 
they we´re pretty wild in his eyes and he is used to evil cams (former world record holder for smallblock doorslammer), so i hope that they deliver the power as expected.
//anders
they we´re pretty wild in his eyes and he is used to evil cams (former world record holder for smallblock doorslammer), so i hope that they deliver the power as expected.
//anders
#7
clipping_point
-
-
- 4,908 posts
Scary Internerd
- Location:Linköping, Sweden
Posted 25 March 2004 - 03:17 PM
So it is a Crower cam. Great difference but how does the values translate to european measurements?
#9
dude
-
-
- 1,404 posts
Billy No Mates
- Gender:Male
- Location:stockholm/sweden
Posted 25 March 2004 - 03:58 PM
std-cam lift on valve is 9.5mm and 12mm on the race-cam
it´s the 1148ec cam not the es that i bought.
Edited by dude, 25 March 2004 - 04:00 PM.
#12
clipping_point
-
-
- 4,908 posts
Scary Internerd
- Location:Linköping, Sweden
Posted 13 April 2004 - 08:39 PM
Anyone who knows the duration for the standard cams? And cam replacements that have been complete failures? Is a high lift good/bad? Will a 256° cam on a standard engine give any improvement? Anyone? 
#17
Ricky2772
-
-
- 3,685 posts
Scary Internerd
- Interests:For those who grasp for Hir beyond the horizon of usual consciousness, preparing for the time when something powerful will present Hir-Self This advise is given...
Posted 21 April 2004 - 03:49 PM
I would remove the mantapart cams from the list...somebody might fall for it.... 
#18
clipping_point
-
-
- 4,908 posts
Scary Internerd
- Location:Linköping, Sweden
Posted 21 April 2004 - 03:57 PM
Yeah it is a competitive price....but not the delivery schedule!! 
Have you bought a cam as well from there?
Have you bought a cam as well from there?
#19
clipping_point
-
-
- 4,908 posts
Scary Internerd
- Location:Linköping, Sweden
Posted 01 October 2004 - 11:14 AM
Kent cams in the UK make a few cams as well
Attached Files
-
Cams_incl._kent.jpg 50.12KB
0 downloads
#20
dude
-
-
- 1,404 posts
Billy No Mates
- Gender:Male
- Location:stockholm/sweden
6 user(s) are reading this topic
0 members, 6 guests, 0 anonymous users
