I recently bought the VDO 4802 as an upgrade, along with the temprature probe.
Took it all along to my local car radio installers, and got them to fit a pair of Kenwood speakers that they recomended. The 4802 gives warnings through the front speakers, so I asked them to switch the wires over in the plug, the same with the live feed.
Returned a couple of hours later, everything ok, but they couldn`t connect temp probe as interface was missing, and they couldn`t connect the speed sensor,so reccomend my main dealer do it.
Today, Vx goes in for an oil and filter change, and I asked the workshop if they can look at radio as well.
I returned to the workshop later and was asked `who fitted the radio?`Why I asked? They replied that the wires have been cut and spliced!`
They didnt bother switching the pins in the plugs, just cutting the wires and switching them around.
The whole point in getting the VDO set is that it would be a straight swap!
Any thoughts on this?
Steve V.
Radio Installers
Started by
stevevx220
, Dec 31 2002 06:56 PM
1 reply to this topic
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users