3266 replies to this topic

[The Batman]

How are you work out the angle of attack for the canards?

see where the canards i bought sit flush and hope it works

You should get a job with Ferrari f1

turnt them down a few times... not really a fan of red

[VXT Tim]

How are you work out the angle of attack for the canards?

see where the canards i bought sit flush and hope it works

You should get a job with Ferrari f1

turnt them down a few times... not really a fan of red

Me either that's why I was hoping you'd go there with all your maths and science

[The Batman]

there is noway i can afford to do a wind tunnel day so im going with they work until proven now

[VXT Tim]

Desk fan, smoke machine, garage.... DONE!

[The Batman]

Desk fan, smoke machine, garage.... DONE!

when can i come round

[VXT Tim]

I'm sure it'd work fine When can you move it

Edited by VXT Tim, 16 September 2011 - 05:36 PM.

[NickB787]

looks great Joe BIG can you make me a couple of brackets up please

[The Batman]

looks great Joe BIG can you make me a couple of brackets up please

thats 3 sets on order no worries

[NickB787]

looks great Joe BIG can you make me a couple of brackets up please

thats 3 sets on order no worries

great have you figured out how to get the clam on?
heard any news about my car?

Edited by NickB777, 17 September 2011 - 10:13 AM.

[The Batman]

nope whats the latest? na thats todays antics! there is no doubt that it will have to have a removable boot floor which im fine with as i need to cover up a giant hole where the tms manifold stuck through anyway!

[NickB787]

nothing I am away again so haven't spoken to Jon, thought you might have

[The Batman]

na i havent these spoiler struts are a serious pain in the ars.. i am thinking of new ideas

[garyk220]

Joe, you could make the struts up in 2 parts. A bottom bracket that bolts to the subframe as you have already (but sits flush with the boot floor). Then the top section can fit inside the boot and bolt down onto the lower bracket. That way the only mods required to the clam are a couple of holes where you bolt the 2 sections together and the slots in the top to fit the wing supports. Difficult to describe, but looking from the rear, the current support is an A shape. The lower section would eb the short legs of the A and the top section the larger triangular part of the A, with the bottom of the triangle sitting flush on the boot floor.

[The Batman]

The problem with that is the boot floor flexes alright and can "crush" when pushing if you know what I mean. I am now thinking about binning the lower struts and making one that rather than bolts to the side of the subframe bolts down onto it

[southpaw]

Saw an air filter today worthy of your new engine

[The Batman]

that is a monsterous filter

but my design is very good and i hope to complete it this weekend

i am going to get my dremel out this weekend and do this to the front end



then i am going to fit the louvres to vent through them aswell as arch liner vents and grills

also fit front V, brake cooling pipes and front spliter

[chris_uk]

joe please dont do that to your clam! give me your clam and do that to mine instead.

[The Batman]

yours has worse acne than a school of teenagers

[chris_uk]

exactly why you should use my clam!

[leevx2.2]

yours has worse acne than a school of teenagers

Lol
it makes it go faster as it's lighter it has no paint on it lol