3266 replies to this topic

[vocky]

blend it in with the line from the light, like on your red clam

[The Batman]

yeah thats what i was thinking manifold needs a bit of welding done to it, so hopefully this is the problem i unplugged lambda 1 and on idle it was at about 11.5

[Mike (Cliffie)]

That looks amazing Jo, top effort.

[Hark]

That looks immense lol Superb! Are you losing the boot now you have two rear clams or refitting it after?

[Nev]

Hehe, I wonder who will be the first of us to get all the nasty bonding/rubbing down/filling/spraying first Joe! Hopefully me, as I am paying a pro to do mine You have a suspected cracking exhaust manifold already?? Crikey, who made it? I hope they fix it up good and check for other weaknesses for you. At least its nice and easy to access/remove on a Z22

Edited by Nev, 21 January 2012 - 05:06 PM.

[Exmantaa]

yeah thats what i was thinking

manifold needs a bit of welding done to it, so hopefully this is the problem

i unplugged lambda 1 and on idle it was at about 11.5

OK, that sounds and acts like a pre-O2 air leak, so get it fixed. And we need proof/pix!

[NickB787]

You have a suspected cracking exhaust manifold already?? Crikey, who made it? I hope they fix it up good and check for other weaknesses for you. At least its nice and easy to access/remove on a Z22

not with this manifold, clam off, Joe though is now expert at taking his off.

Edited by NickB777, 21 January 2012 - 05:46 PM.

[turbobob]

trial fit!

I think Joe may be coming out

Edited by turbobob, 21 January 2012 - 07:06 PM.

[G-Bob]

Vroom vroom!!

[The Batman]

haters

[turbobob]

Edited by turbobob, 21 January 2012 - 07:12 PM.

[G-Bob]

haters

Looked nicer when you first got it before you ruined it!

[Nev]

Look at the amount of extra room in the rear wheel arch Looks like enough to sqeeze 19" rims to me, with 30% profile and loads of width. Not so sure about the space that will be available under the fronts though...

[The Batman]

there is feck all space at the rear considering! i reckon 265s will be the biggest you will be able to fit on the rear imo fronts however i dont think you will get biger than 17" maybe 225s...

[Nev]

Really? Ug. Well, thats pissed on my fireworks then !

[The Batman]

Maybe bigger... But not by much..

[The Batman]

havent got the heart to work on the car yet and have asked Jon at CMS to take delivery of the car and do all the repairs needed... so am awaiting an email back.

anyways dremelling seems to make me happy (although i burnt myself and tried dremeling off a finger )

hard top is done
bootlid is almost done
one side skirt is almost done
one side of louvres is almost done

[nicollow]

Worse than my old cut-and-shut!!

Edited by Nicol Low, 24 January 2012 - 04:44 PM.

[The Batman]

cheeky fecker louvres took a mission to cut out i reckon just that one side was probably about 1hr - 2hrs, the mould is very thick.

[Wreelybro]

cheeky fecker

louvres took a mission to cut out i reckon just that one side was probably about 1hr - 2hrs, the mould is very thick.

Yeah looks good though mate keep up the good work!