3266 replies to this topic

[The Batman]

in all fairness i did it in a well ventilated garden! p.s. when am i getting a FLD visit

[SteveA]

Looking epic! Kinda reminds me of this;

[The Batman]

cheers buddy maybe that should be the tow car

[FLD]

in all fairness i did it in a well ventilated garden!

p.s. when am i getting a FLD visit

Dunno yet. My head is full of work stuff. I need to find out when my better half is working a weekend. Perhaps 4 weeks time ish.

[siztenboots]

can you recall what size , or model the porsche throttle body is, 75mm (cayman) , or the gt3 one 82mm , or the smaller 68mm (boxter s)

[The Batman]

none of the above its a 70mm one

[leevx2.2]

can you recall what size , or model the porsche throttle body is, 75mm (cayman) , or the gt3 one 82mm , or the smaller 68mm (boxter s)

I might have one for sale don't no if I can be bovered to do a z20let conversion

[FLD]

can you recall what size , or model the porsche throttle body is, 75mm (cayman) , or the gt3 one 82mm , or the smaller 68mm (boxter s)

I might have one for sale don't no if I can be bovered to do a z20let conversion

...and if it needs Z20LET management I have a ecu/chip/transponder/loom set along with a YH crank. Work is affecting my modding!

Edited by FLD, 10 February 2012 - 05:59 PM.

[The Batman]

couple of photos of the hard top and the DIY seals





just about to tiger seal a bit of carbon fibre to seal the scoop

[The Batman]

well managed to blag a few hours working on my own car today, which i know will shock many until JG decided to phone me and stop me from working he was very shocked

here are some photos:





my plan is to copy badster and move the relays and fusebox to above the battery so i can get rid of wheel arch liners. will also make up a fancy bracket to hold the CC pipes rather than cable ties (before they sit in the tyre weld brackets )



as you can see below, my slag is riding high!! so the plan is to lower it after i know how low the side skirts go! time for some bigger tyres i think



then managed to crack on with fitting bonnet pins, WHAT A PIG that is the rear 2 are spot on, front 2 requier a bit more fettling

Edited by joe_589, 15 February 2012 - 06:55 PM.

[GeorgeBC]

Looks mean but still doesnt scare TC . Done many miles on the base map?

[The Batman]

done about 200ish i am thinking i will probably give snet a miss.... although still come in the van and blag some paxs

[GeorgeBC]

Have you got credit notes now then as you missed silverstone and snet? Donington

[Mike (Cliffie)]

Totally awesome dude. If it were on looks alone, you would whip ass.

[The Batman]

thank you sir and georgy boy maybe want to do my trailor course first hopefully get this sorted ASAP

[techieboy]

Donington

With the noise that thing makes?

[techieboy]

i am thinking i will probably give snet a miss.... although still come in the van and blag some paxs

I think I'm cancelling it as well.

[GeorgeBC]

Donington

With the noise that thing makes?

Oh yeah didnt think about that . You could always switch it off and coast down the start finish straight

[The Batman]

thinking of cancelling my insurance and buying a trailor aswell

[Dave E]

i am thinking i will probably give snet a miss.... although still come in the van and blag some paxs

I think I'm cancelling it as well.

cough http://www.vx220.org...elin-opl-105db/ cough